2020 Bmw X6 M Fluid Capacities

OEM fluid capacity chart from the factory service manual for the 2020-2023 (2020-2023).

Quick Answer

Automatic Transmission Fluid

9.88 QTS. (9.34 L) β€” Automatic Transmission Fluid ATF+3

Brake Fluid

β€” BMW Brake Fluid DOT 4 with low viscosity

Differential Gear Oil

0.69 QTS. (0.65 L) β€” Hypoid Axle Oil G2 up to 02/2020, Hypoid Axle Oil G5 (Fuchs Titan EG 4399) from 03/2020

Engine Coolant

4.76 QTS. (4.5 L) β€” Frostox HT-12 antifreeze and corrosion inhibitor Note: Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts).

Engine Oil

10.57 QTS. (10 L) β€” BMW TwinPower Turbo LL12FE, SAE 0W-30

Notes

  • β†’The nameplate in the engine compartment indicates which refrigerant has been used.
  • β†’Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts).
  • β†’Fill with water and - if required - with a washer antifreeze (according to manufacturer's recommendations). Mix the washer fluid before adding it to the reservoir.
Source: Factory service manual β€” 2020 Bmw X6 M 2020-2023.

This vehicle's factory manual

The spec is above. This opens the 2020 Bmw factory books so you can go into the X6 M procedure.

Open the 2020 Bmw manual

Related for Your 2020 Bmw X6 M

Frequently Asked Questions

What are the fluid capacities for a 2020 Bmw X6 M?
The 2020 Bmw X6 M fluid capacities are: Automatic Transmission Fluid: 9.88 QTS. (9.34 L) β€” Automatic Transmission Fluid ATF+3, Brake Fluid: β€” BMW Brake Fluid DOT 4 with low viscosity, Differential Gear Oil: 0.69 QTS. (0.65 L) β€” Hypoid Axle Oil G2 up to 02/2020, Hypoid Axle Oil G5 (Fuchs Titan EG 4399) from 03/2020, Engine Coolant: 4.76 QTS. (4.5 L) β€” Frostox HT-12 antifreeze and corrosion inhibitor Note: Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts)., Engine Oil: 10.57 QTS. (10 L) β€” BMW TwinPower Turbo LL12FE, SAE 0W-30.
How much engine oil does a 2020 Bmw X6 M take?
The 2020 Bmw X6 M takes 10.57 QTS. (10 L) β€” BMW TwinPower Turbo LL12FE, SAE 0W-30.