Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2020 Bmw X3 M40i Fluid Capacities
OEM fluid capacity chart from the factory service manual for the 2020-2021 (2020-2021).
Quick Answer
Brake Fluid
— BMW Brake Fluid DOT 4 with low viscosity
Differential Gear Oil
— Hypoid Axle Oil G3 (Fuchs Titan EG 4218) Only for Rear differential, not for hang-on clutch (HOC)
Engine Coolant (3.0L Eng)
5.07 QTS. (4.79 L) — Frostox HT-12 antifreeze and corrosion inhibitor
Engine Oil (3.0L Eng)
7.61 QTS. (7.2 L) — BMW High Performance Synthetic Engine Oil, SAE 0W-20
Notes
- →The nameplate in the engine compartment indicates which refrigerant has been used.
- →BMW Part No. 83 22 2 365 988.
- →Fill with water and - if required - with a washer antifreeze (according to manufacturer's recommendations). Mix the washer fluid before adding it to the reservoir.
This vehicle's factory manual
The spec is above. This opens the 2020 Bmw factory books so you can go into the X3 M40i procedure.
Related for Your 2020 Bmw X3 M40i
Frequently Asked Questions
- What are the fluid capacities for a 2020 Bmw X3 M40i?
- The 2020 Bmw X3 M40i fluid capacities are: Brake Fluid: — BMW Brake Fluid DOT 4 with low viscosity, Differential Gear Oil: — Hypoid Axle Oil G3 (Fuchs Titan EG 4218) Only for Rear differential, not for hang-on clutch (HOC), Engine Coolant (3.0L Eng): 5.07 QTS. (4.79 L) — Frostox HT-12 antifreeze and corrosion inhibitor, Engine Oil (3.0L Eng): 7.61 QTS. (7.2 L) — BMW High Performance Synthetic Engine Oil, SAE 0W-20.
- How much engine oil does a 2020 Bmw X3 M40i take?
- The 2020 Bmw X3 M40i takes — Hypoid Axle Oil G3 (Fuchs Titan EG 4218) Only for Rear differential, not for hang-on clutch (HOC).