Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2020 Bmw 840i-xdrive Fluid Capacities
OEM fluid capacity chart from the factory service manual for the 2020-2024 (2020-2024).
Quick Answer
Automatic Transmission Fluid
9.80 QTS. (9.27 L) — Automatic Transmission Fluid ATF+3
Brake Fluid
— BMW Brake Fluid DOT 4 with low viscosity
Differential Gear Oil
— Hypoid Axle Oil G2 up to 02/2020, Hypoid Axle Oil G5 (Fuchs Titan EG 4399) from 03/2020
Engine Coolant
3.12 QTS. (2.95 L) — Frostox HT-12 antifreeze and corrosion inhibitor
Engine Oil
6.90 QTS. (6.52 L) — BMW High Performance Synthetic Engine Oil, SAE 0W-20
Notes
- →The nameplate in the engine compartment indicates which refrigerant has been used.
- →Fill with water and - if required - with a washer antifreeze (according to manufacturer's recommendations). Mix the washer fluid before adding it to the reservoir.
This vehicle's factory manual
The spec is above. This opens the 2020 Bmw factory books so you can go into the 840i-xdrive procedure.
Related for Your 2020 Bmw 840i-xdrive
Frequently Asked Questions
- What are the fluid capacities for a 2020 Bmw 840i-xdrive?
- The 2020 Bmw 840i-xdrive fluid capacities are: Automatic Transmission Fluid: 9.80 QTS. (9.27 L) — Automatic Transmission Fluid ATF+3, Brake Fluid: — BMW Brake Fluid DOT 4 with low viscosity, Differential Gear Oil: — Hypoid Axle Oil G2 up to 02/2020, Hypoid Axle Oil G5 (Fuchs Titan EG 4399) from 03/2020, Engine Coolant: 3.12 QTS. (2.95 L) — Frostox HT-12 antifreeze and corrosion inhibitor, Engine Oil: 6.90 QTS. (6.52 L) — BMW High Performance Synthetic Engine Oil, SAE 0W-20.
- How much engine oil does a 2020 Bmw 840i-xdrive take?
- The 2020 Bmw 840i-xdrive takes 6.90 QTS. (6.52 L) — BMW High Performance Synthetic Engine Oil, SAE 0W-20.