2020 Bmw 540i Fluid Capacities

OEM fluid capacity chart from the factory service manual for the 2020-2023 (2020-2023).

Quick Answer

Automatic Transmission Fluid

9.80 QTS. (9.27 L) β€” Automatic Transmission Fluid ATF+3

Brake Fluid

β€” BMW Brake Fluid DOT 4 with low viscosity

Differential Gear Oil

β€” Hypoid Axle Oil G3 (Fuchs Titan EG 4218) Up to 02-2020. From 03-2020: Hypoid Axle Oil G5 (Fuchs Titan EG 4399)

Engine Coolant

3.12 QTS. (2.95 L) β€” Frostox HT-12 antifreeze and corrosion inhibitor Note: Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts).

Engine Oil

6.90 QTS. (6.52 L) β€” BMW High Performance Synthetic Engine Oil, SAE 0W-20

Notes

  • β†’The nameplate in the engine compartment indicates which refrigerant has been used.
  • β†’Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts).
  • β†’Fill with water and - if required - with a washer antifreeze (according to manufacturer's recommendations). Mix the washer fluid before adding it to the reservoir.
Source: Factory service manual β€” 2020 Bmw 540i 2020-2023.

This vehicle's factory manual

The spec is above. This opens the 2020 Bmw factory books so you can go into the 540i procedure.

Open the 2020 Bmw manual

Related for Your 2020 Bmw 540i

Frequently Asked Questions

What are the fluid capacities for a 2020 Bmw 540i?
The 2020 Bmw 540i fluid capacities are: Automatic Transmission Fluid: 9.80 QTS. (9.27 L) β€” Automatic Transmission Fluid ATF+3, Brake Fluid: β€” BMW Brake Fluid DOT 4 with low viscosity, Differential Gear Oil: β€” Hypoid Axle Oil G3 (Fuchs Titan EG 4218) Up to 02-2020. From 03-2020: Hypoid Axle Oil G5 (Fuchs Titan EG 4399), Engine Coolant: 3.12 QTS. (2.95 L) β€” Frostox HT-12 antifreeze and corrosion inhibitor Note: Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts)., Engine Oil: 6.90 QTS. (6.52 L) β€” BMW High Performance Synthetic Engine Oil, SAE 0W-20.
How much engine oil does a 2020 Bmw 540i take?
The 2020 Bmw 540i takes 6.90 QTS. (6.52 L) β€” BMW High Performance Synthetic Engine Oil, SAE 0W-20.