Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2020 Bmw 430i-xdrive Fluid Capacities
OEM fluid capacity chart from the factory service manual for the 2019-2020 (2019-2020).
Quick Answer
Automatic Transmission Fluid
9.30 QTS. (8.8 L) — Automatic Transmission Fluid ATF+3
Brake Fluid
— BMW Brake Fluid DOT 4 with low viscosity
Differential Gear Oil
— Hypoid Axle Oil G3 (Fuchs Titan EG 4218) Up to 02-2020. From 03-2020: Hypoid Axle Oil G5 (Fuchs Titan EG 4399)
Engine Coolant
3.80 QTS. (3.59 L) — Frostox HT-12 antifreeze and corrosion inhibitor
Engine Oil
5.25 QTS. (4.96 L) — BMW High Performance Synthetic Engine Oil, SAE 0W-30 or SAE 0W-20 Note: The suitable viscosity grade is indicated on a label in the engine compartment. Alternatively, also engine oils with viscosity grades SAE 5W-20, SAE 5W-30, SAE 0W-40 or SAE 5W-40 can be used.
Notes
- →The nameplate in the engine compartment indicates which refrigerant has been used.
- →Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts).
- →The suitable viscosity grade is indicated on a label in the engine compartment. Alternatively, also engine oils with viscosity grades SAE 5W-20, SAE 5W-30, SAE 0W-40 or SAE 5W-40 can be used.
- →Fill with water and - if required - with a washer antifreeze (according to manufacturer's recommendations). Mix the washer fluid before adding it to the reservoir.
This vehicle's factory manual
2020 Bmw 430i-xdrive: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Related for Your 2020 Bmw 430i-xdrive
Frequently Asked Questions
- What are the fluid capacities for a 2020 Bmw 430i-xdrive?
- The 2020 Bmw 430i-xdrive fluid capacities are: Automatic Transmission Fluid: 9.30 QTS. (8.8 L) — Automatic Transmission Fluid ATF+3, Brake Fluid: — BMW Brake Fluid DOT 4 with low viscosity, Differential Gear Oil: — Hypoid Axle Oil G3 (Fuchs Titan EG 4218) Up to 02-2020. From 03-2020: Hypoid Axle Oil G5 (Fuchs Titan EG 4399), Engine Coolant: 3.80 QTS. (3.59 L) — Frostox HT-12 antifreeze and corrosion inhibitor, Engine Oil: 5.25 QTS. (4.96 L) — BMW High Performance Synthetic Engine Oil, SAE 0W-30 or SAE 0W-20 Note: The suitable viscosity grade is indicated on a label in the engine compartment. Alternatively, also engine oils with viscosity grades SAE 5W-20, SAE 5W-30, SAE 0W-40 or SAE 5W-40 can be used..
- How much engine oil does a 2020 Bmw 430i-xdrive take?
- Engine oil capacity depends on the engine and whether the filter is changed. Check the applicable manual for your exact vehicle and service procedure before filling.