Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2020 Audi A8Oil Type & Capacity
OEM spec from the factory service manual for the 3.0L Eng VIN D variant.
Quick Answer
Oil Type
AUDI High Performance Genuine Engine Oil SAE 0W-20. VW 508 00
Capacity (w/ Filter)
8.00 QTS.
7.57 L
Variant
3.0L Eng VIN D
Note: Refer to Technical Bulletin 2010043 for engine oils meeting the required Audi oil quality standards.
Part numbers are for reference only.
Approximate capacity.
Source: Factory service manual — 2020 Audi A8 3.0L Eng VIN D. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of oil does a 2020 Audi A8 take?
- The 2020 Audi A8 requires AUDI High Performance Genuine Engine Oil SAE 0W-20. VW 508 00. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the 3.0L Eng VIN D configuration.
- How much oil does a 2020 Audi A8 need?
- The 2020 Audi A8 takes 8.00 QTS. (7.57 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2020 Audi A8?
- Yes — synthetic oil that meets the AUDI High Performance Genuine Engine Oil SAE 0W-20. VW 508 00 specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2020 Audi A8?
- Using oil that does not meet the AUDI High Performance Genuine Engine Oil SAE 0W-20. VW 508 00 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.