Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2019 Subaru ForesterOil Type & Capacity
OEM spec from the factory service manual for the Base variant.
Quick Answer
Oil Type
ILSAC GF-5, API - SN, SAE 0W-20 Synthetic Oil
Capacity (w/ Filter)
4.40 QTS.
4.16 L
Variant
Base
Note: If 0W-20 synthetic oil is not available, 5W-30 conventional oil may be used if replenishment is needed but should be changed to 0W-20 synthetic oil at the next oil change.
Source: Factory service manual — 2019 Subaru Forester Base. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of oil does a 2019 Subaru Forester take?
- The 2019 Subaru Forester requires ILSAC GF-5, API - SN, SAE 0W-20 Synthetic Oil. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Base configuration.
- How much oil does a 2019 Subaru Forester need?
- The 2019 Subaru Forester takes 4.40 QTS. (4.16 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2019 Subaru Forester?
- Yes — synthetic oil that meets the ILSAC GF-5, API - SN, SAE 0W-20 Synthetic Oil specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2019 Subaru Forester?
- Using oil that does not meet the ILSAC GF-5, API - SN, SAE 0W-20 Synthetic Oil specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.