How much coolant does a 2019 Jeep Renegade hold?

The 2019 Jeep Renegade cooling system capacity is 8.80 QTS. (8.32 L).

What happens if I use the wrong coolant in my 2019 Jeep Renegade?

Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.

Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

2019 Jeep RenegadeCoolant Type & Capacity

OEM spec from the factory service manual for the Altitude, 1.3L Eng VIN 1, 4WD variant.

Quick Answer

Coolant Type

MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of Chrysler Material Standard MS-12106

Capacity

8.80 QTS.

8.32 L

Variant

Altitude, 1.3L Eng VIN 1, 4WD

Note: Includes: heater and coolant recovery tank filled to "max" level.

This vehicle's factory manual

The coolant spec is above. This opens the fluids section of the 2019 Jeep Renegade Altitude, 1.3L Eng VIN 1, 4WD factory book.

Open the 2019 Jeep manual

Other specs:All specs Tire Size

What You'll Need

Engine Coolant / Antifreeze

MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of Chrysler Material Standard MS-12106 for Jeep Renegade

Search Amazon →

Tool

Related for Your 2019 Jeep Renegade

Maintenance Specs

🔘Tire Size

Quick Actions

🏠2019 Jeep Renegade Hub 🛠️All Repair Guides 🤖AI Diagnosis

Frequently Asked Questions

What type of coolant does a 2019 Jeep Renegade take?: The 2019 Jeep Renegade requires MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of Chrysler Material Standard MS-12106. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Altitude, 1.3L Eng VIN 1, 4WD configuration.
How much coolant does a 2019 Jeep Renegade hold?: The 2019 Jeep Renegade cooling system capacity is 8.80 QTS. (8.32 L).
Can I use universal coolant in my 2019 Jeep Renegade?: It is strongly recommended to use coolant that meets the MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of Chrysler Material Standard MS-12106 specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
What happens if I use the wrong coolant in my 2019 Jeep Renegade?: Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.