Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2019 Hyundai Santa Fe XlCoolant Type & Capacity
OEM spec from the factory service manual for the Limited Ultimate, AWD variant.
Quick Answer
Coolant Type
50/50 mixture of Ethylene Glycol Antifreeze and distilled water
Capacity
9.60 QTS.
9.08 L
Variant
Limited Ultimate, AWD
Note: The engine coolant should be compatible with aluminum engine parts.
This vehicle's factory manual
2019 Hyundai Santa Fe Xl: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
What You'll Need
Related for Your 2019 Hyundai Santa Fe Xl
Frequently Asked Questions
- What type of coolant does a 2019 Hyundai Santa Fe Xl take?
- The 2019 Hyundai Santa Fe Xl requires 50/50 mixture of Ethylene Glycol Antifreeze and distilled water. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Limited Ultimate, AWD configuration.
- How much coolant does a 2019 Hyundai Santa Fe Xl hold?
- The 2019 Hyundai Santa Fe Xl cooling system capacity is 9.60 QTS. (9.08 L).
- Can I use universal coolant in my 2019 Hyundai Santa Fe Xl?
- It is strongly recommended to use coolant that meets the 50/50 mixture of Ethylene Glycol Antifreeze and distilled water specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2019 Hyundai Santa Fe Xl?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.