Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2019 Ford FlexOil Type & Capacity
OEM spec from the factory service manual for the Limited, 3.5L Eng VIN 8, AWD variant.
Quick Answer
Oil Type
MOTORCRAFT SAE 5W-30 Premium Synthetic Blend Motor Oil or Optional: MOTORCRAFT SAE 5W-30 Full Synthetic Motor Oil
Capacity (w/ Filter)
6.00 QTS.
5.67 L
Variant
Limited, 3.5L Eng VIN 8, AWD
Source: Factory service manual — 2019 Ford Flex Limited, 3.5L Eng VIN 8, AWD. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of oil does a 2019 Ford Flex take?
- The 2019 Ford Flex requires MOTORCRAFT SAE 5W-30 Premium Synthetic Blend Motor Oil or Optional: MOTORCRAFT SAE 5W-30 Full Synthetic Motor Oil. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Limited, 3.5L Eng VIN 8, AWD configuration.
- How much oil does a 2019 Ford Flex need?
- The 2019 Ford Flex takes 6.00 QTS. (5.67 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2019 Ford Flex?
- Yes — synthetic oil that meets the MOTORCRAFT SAE 5W-30 Premium Synthetic Blend Motor Oil or Optional: MOTORCRAFT SAE 5W-30 Full Synthetic Motor Oil specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2019 Ford Flex?
- Using oil that does not meet the MOTORCRAFT SAE 5W-30 Premium Synthetic Blend Motor Oil or Optional: MOTORCRAFT SAE 5W-30 Full Synthetic Motor Oil specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.