Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2019 Chevrolet TahoeOil Type & Capacity
OEM spec from the factory service manual for the Premier, 5.3L Eng VIN C, 4WD, Gas variant.
Quick Answer
Oil Type
API - SAE 0W-20
Capacity (w/ Filter)
8.00 QTS.
7.57 L
Variant
Premier, 5.3L Eng VIN C, 4WD, Gas
Note: Engine oil meeting the dexos1 specification of the proper SAE viscosity grade. ACDelco dexos1 full synthetic is recommended.
Source: Factory service manual — 2019 Chevrolet Tahoe Premier, 5.3L Eng VIN C, 4WD, Gas. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of oil does a 2019 Chevrolet Tahoe take?
- The 2019 Chevrolet Tahoe requires API - SAE 0W-20. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Premier, 5.3L Eng VIN C, 4WD, Gas configuration.
- How much oil does a 2019 Chevrolet Tahoe need?
- The 2019 Chevrolet Tahoe takes 8.00 QTS. (7.57 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2019 Chevrolet Tahoe?
- Yes — synthetic oil that meets the API - SAE 0W-20 specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2019 Chevrolet Tahoe?
- Using oil that does not meet the API - SAE 0W-20 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.