Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2019 Chevrolet Spark Fluid Capacities
OEM fluid capacity chart from the factory service manual for the 2019-2020 (2019-2020).
Quick Answer
Air Cond Compressor Oil
2.00 OZS. (0.05 L) — PAG 46
Automatic Transmission Fluid
6.55 QTS. (6.19 L) — ACDelco CVT Fluid
Brake Fluid
0.80 QTS. (0.75 L) — DOT 4 Hydraulic Brake Fluid
Engine Coolant
4.64 QTS. (4.39 L) — 50/50 mixture of DEX-COOL and clean, drinkable water Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Engine Oil
4.23 QTS. (4 L) — API - SAE 0W-20 Note: Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
Manual Transmission Fluid
1.90 QTS. (1.79 L) — Transmission Fluid XGP SAE 75W85W
Notes
- →All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
- →Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
- →Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements.
This vehicle's factory manual
2019 Chevrolet Spark: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Related for Your 2019 Chevrolet Spark
Frequently Asked Questions
- What are the fluid capacities for a 2019 Chevrolet Spark?
- The 2019 Chevrolet Spark fluid capacities are: Air Cond Compressor Oil: 2.00 OZS. (0.05 L) — PAG 46, Automatic Transmission Fluid: 6.55 QTS. (6.19 L) — ACDelco CVT Fluid, Brake Fluid: 0.80 QTS. (0.75 L) — DOT 4 Hydraulic Brake Fluid, Engine Coolant: 4.64 QTS. (4.39 L) — 50/50 mixture of DEX-COOL and clean, drinkable water Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling., Engine Oil: 4.23 QTS. (4 L) — API - SAE 0W-20 Note: Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures., Manual Transmission Fluid: 1.90 QTS. (1.79 L) — Transmission Fluid XGP SAE 75W85W.
- How much engine oil does a 2019 Chevrolet Spark take?
- The 2019 Chevrolet Spark takes 4.23 QTS. (4 L) — API - SAE 0W-20 Note: Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures..