Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2019 Chevrolet Silverado 2500 Hd Fluid Capacities
OEM fluid capacity chart from the factory service manual for the 2019 (2019).
Quick Answer
Air Cond Compressor Oil
4.00 OZS. (0.11 L) — PAG Oil
Automatic Transmission Fluid (Trans Mfr CD 6L90-E/MYD)
10.50 QTS. (9.93 L) — Automatic Transmission Fluid DEXRON VI Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Brake Fluid
— DOT 3 Hydraulic Brake Fluid
Differential Gear Oil
3.17 QTS. (2.99 L) — SAE 75W-90 Synthetic Axle Lubricant Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Engine Coolant (6.0L Eng)
16.30 QTS. (15.42 L) — 50/50 mixture of DEX-COOL and clean, drinkable water Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Engine Oil (6.0L Eng)
5.50 QTS. (5.2 L) — API - SAE 5W-30 Note: Use only engine oil licensed to the dexos1 specification, or equivalent. ACDelco dexos1 Synthetic Blend is recommended. Failure to use the recommended engine oil or equivalent can result in engine damage not covered by the vehicle warranty. Check to be sure the oil is approved to the dexos1 specification. For areas of extreme cold, where temperatures fall below -20Deg.F (-29Deg.C), it is recommended a SAE 5W-30 synthetic oil or a SAE 10W-30 oil. Both will provide easier cold starting and better protection for your engine at extremely low temperatures. DO NOT use other viscosity grade oils such as SAE 10W-30, 10W-40, or 10W-50.
Power Steering Fluid
2.00 PTS. (0.94 L) — GM Power Steering Fluid Note: GM Part No. 89021184. Approximate capacity.
Automatic Transmission Fluid (Trans Mfr CD 1000/MW7)
12.70 QTS. (12.01 L) — Automatic Transmission Fluid DEXRON VI Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Differential Gear Oil (Diesel)
3.17 QTS. (2.99 L) — SAE 75W-90 Synthetic Axle Lubricant Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Engine Coolant (6.6L Eng)
31.50 QTS. (29.81 L) — 50/50 mixture of DEX-COOL and clean, drinkable water Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Engine Oil (6.6L Eng)
9.20 QTS. (8.7 L) — API - SAE 15W-40 Note: Oil designated as API CJ-4 are required for the vehicle. The CJ-4 designation can appear either alone or in combination with other American Institute (API) designations, such as API CJ-4/SL. These letters show API levels of quality. DO NOT use other viscosity grade oils such as SAE 10W-30, 10W-40, or 20W-50. When it is very cold, below 0Deg. F (-18Deg.C), you should use SAE 5W-40 to improve cold starting. Do not use other viscosity such as SAE 10W-30, SAE 10W-40, or SAE 20W-50.
Transfer Case Fluid (T/Case Mfr CD 1625-6/NQF)
1.60 QTS. (1.51 L) — Automatic Transmission Fluid DEXRON VI Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Transfer Case Fluid (T/Case Mfr CD 1222-5-6/NQG)
1.60 QTS. (1.51 L) — Automatic Transmission Fluid DEXRON VI Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Notes
- →For further details see "Air conditioner specification label".
- →All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
- →Approximate capacity. Diesel Exhaust Fluid or diesel exhaust fluid that meets ISO 22241-1 or displays the API Diesel Exhaust Fluid Certification Mark.
- →Use only engine oil licensed to the dexos1 specification, or equivalent. ACDelco dexos1 Synthetic Blend is recommended. Failure to use the recommended engine oil or equivalent can result in engine damage not covered by the vehicle warranty. Check to be sure the oil is approved to the dexos1 specification. For areas of extreme cold, where temperatures fall below -20Deg.F (-29Deg.C), it is recommended a SAE 5W-30 synthetic oil or a SAE 10W-30 oil. Both will provide easier cold starting and better protection for your engine at extremely low temperatures. DO NOT use other viscosity grade oils such as SAE 10W-30, 10W-40, or 10W-50.
- →GM Part No. 89021184. Approximate capacity.
- →Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements.
- →Oil designated as API CJ-4 are required for the vehicle. The CJ-4 designation can appear either alone or in combination with other American Institute (API) designations, such as API CJ-4/SL. These letters show API levels of quality. DO NOT use other viscosity grade oils such as SAE 10W-30, 10W-40, or 20W-50. When it is very cold, below 0Deg. F (-18Deg.C), you should use SAE 5W-40 to improve cold starting. Do not use other viscosity such as SAE 10W-30, SAE 10W-40, or SAE 20W-50.
This vehicle's factory manual
2019 Chevrolet Silverado 2500 Hd: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Related for Your 2019 Chevrolet Silverado 2500 Hd
Frequently Asked Questions
- What are the fluid capacities for a 2019 Chevrolet Silverado 2500 Hd?
- The 2019 Chevrolet Silverado 2500 Hd fluid capacities are: Air Cond Compressor Oil: 4.00 OZS. (0.11 L) — PAG Oil, Automatic Transmission Fluid (Trans Mfr CD 6L90-E/MYD): 10.50 QTS. (9.93 L) — Automatic Transmission Fluid DEXRON VI Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling., Brake Fluid: — DOT 3 Hydraulic Brake Fluid, Differential Gear Oil: 3.17 QTS. (2.99 L) — SAE 75W-90 Synthetic Axle Lubricant Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling., Engine Coolant (6.0L Eng): 16.30 QTS. (15.42 L) — 50/50 mixture of DEX-COOL and clean, drinkable water Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling., Engine Oil (6.0L Eng): 5.50 QTS. (5.2 L) — API - SAE 5W-30 Note: Use only engine oil licensed to the dexos1 specification, or equivalent. ACDelco dexos1 Synthetic Blend is recommended. Failure to use the recommended engine oil or equivalent can result in engine damage not covered by the vehicle warranty. Check to be sure the oil is approved to the dexos1 specification. For areas of extreme cold, where temperatures fall below -20Deg.F (-29Deg.C), it is recommended a SAE 5W-30 synthetic oil or a SAE 10W-30 oil. Both will provide easier cold starting and better protection for your engine at extremely low temperatures. DO NOT use other viscosity grade oils such as SAE 10W-30, 10W-40, or 10W-50., Power Steering Fluid: 2.00 PTS. (0.94 L) — GM Power Steering Fluid Note: GM Part No. 89021184. Approximate capacity., Automatic Transmission Fluid (Trans Mfr CD 1000/MW7): 12.70 QTS. (12.01 L) — Automatic Transmission Fluid DEXRON VI Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling., Differential Gear Oil (Diesel): 3.17 QTS. (2.99 L) — SAE 75W-90 Synthetic Axle Lubricant Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling., Engine Coolant (6.6L Eng): 31.50 QTS. (29.81 L) — 50/50 mixture of DEX-COOL and clean, drinkable water Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling., Engine Oil (6.6L Eng): 9.20 QTS. (8.7 L) — API - SAE 15W-40 Note: Oil designated as API CJ-4 are required for the vehicle. The CJ-4 designation can appear either alone or in combination with other American Institute (API) designations, such as API CJ-4/SL. These letters show API levels of quality. DO NOT use other viscosity grade oils such as SAE 10W-30, 10W-40, or 20W-50. When it is very cold, below 0Deg. F (-18Deg.C), you should use SAE 5W-40 to improve cold starting. Do not use other viscosity such as SAE 10W-30, SAE 10W-40, or SAE 20W-50., Transfer Case Fluid (T/Case Mfr CD 1625-6/NQF): 1.60 QTS. (1.51 L) — Automatic Transmission Fluid DEXRON VI Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling., Transfer Case Fluid (T/Case Mfr CD 1222-5-6/NQG): 1.60 QTS. (1.51 L) — Automatic Transmission Fluid DEXRON VI Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling..
- How much engine oil does a 2019 Chevrolet Silverado 2500 Hd take?
- Engine oil capacity depends on the engine and whether the filter is changed. Check the applicable manual for your exact vehicle and service procedure before filling.