Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2019 Chevrolet Cruze Fluid Capacities
OEM fluid capacity chart from the factory service manual for the 2019 (2019).
Quick Answer
Air Cond Compressor Oil
2.03 OZS. (0.06 L) — PAG 46
Automatic Transmission Fluid (Trans Mfr CD 6T35/MNU)
— Automatic Transmission Fluid DEXRON VI Note: Fluid Capacity is between: 5.3-7.4 qts.
Brake Fluid
1.06 QTS. (1 L) — DOT 3 Hydraulic Brake Fluid
Engine Coolant (1.4L Eng)
6.32 QTS. (5.98 L) — 50/50 mixture of DEX-COOL and clean, drinkable water
Engine Oil (1.4L Eng)
4.23 QTS. (4 L) — API - SAE 0W-20 Note: Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended.
Automatic Transmission Fluid (Trans Mfr CD CVT250/MRG)
8.80 QTS. (8.32 L) — HP CVTF
Automatic Transmission Fluid (Trans Mfr CD 9T50/M3D)
— Automatic Transmission Fluid DEXRON VI Note: Fluid Capacity is between: 2.1 - 3.2 qts.
Engine Coolant (1.6L Eng)
6.92 QTS. (6.54 L) — 50/50 mixture of DEX-COOL and clean, drinkable water
Engine Oil (1.6L Eng)
5.30 QTS. (5.01 L) — API - SAE 5W-30 Note: Use engine oils with the dexos2 certification mark. Oils meeting the requirements of the vehicle should have the dexos2 certification mark on the container. This certification mark indicates that the oil has been approved to the dexos2 specification. Use of Substitute Engine Oils if dexos2 is unavailable: In the event that dexos2-approved engine oil is not available at an oil change or for maintaining proper oil level, you may use substitute engine oil that meets ACEA C3 of the appropriate viscosity grade. In an area of extreme cold, where the temperature falls below -29Deg.C (-20Deg.F), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
Notes
- →Fluid Capacity is between: 4.2 - 6.3 qts.
- →Fluid Capacity is between: 8.5 - 9.0 qts.
- →Fluid Capacity is between: 5.3-7.4 qts.
- →Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended.
- →Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements.
- →Fluid Capacity is between: 5.3 - 6.3 qts.
- →Fluid Capacity is between: 9.0 - 10 qts.
- →Fluid Capacity is between: 2.1 - 3.2 qts.
- →Use engine oils with the dexos2 certification mark. Oils meeting the requirements of the vehicle should have the dexos2 certification mark on the container. This certification mark indicates that the oil has been approved to the dexos2 specification. Use of Substitute Engine Oils if dexos2 is unavailable: In the event that dexos2-approved engine oil is not available at an oil change or for maintaining proper oil level, you may use substitute engine oil that meets ACEA C3 of the appropriate viscosity grade. In an area of extreme cold, where the temperature falls below -29Deg.C (-20Deg.F), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
This vehicle's factory manual
2019 Chevrolet Cruze: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Related for Your 2019 Chevrolet Cruze
Frequently Asked Questions
- What are the fluid capacities for a 2019 Chevrolet Cruze?
- The 2019 Chevrolet Cruze fluid capacities are: Air Cond Compressor Oil: 2.03 OZS. (0.06 L) — PAG 46, Automatic Transmission Fluid (Trans Mfr CD 6T35/MNU): — Automatic Transmission Fluid DEXRON VI Note: Fluid Capacity is between: 5.3-7.4 qts., Brake Fluid: 1.06 QTS. (1 L) — DOT 3 Hydraulic Brake Fluid, Engine Coolant (1.4L Eng): 6.32 QTS. (5.98 L) — 50/50 mixture of DEX-COOL and clean, drinkable water, Engine Oil (1.4L Eng): 4.23 QTS. (4 L) — API - SAE 0W-20 Note: Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended., Automatic Transmission Fluid (Trans Mfr CD CVT250/MRG): 8.80 QTS. (8.32 L) — HP CVTF, Automatic Transmission Fluid (Trans Mfr CD 9T50/M3D): — Automatic Transmission Fluid DEXRON VI Note: Fluid Capacity is between: 2.1 - 3.2 qts., Engine Coolant (1.6L Eng): 6.92 QTS. (6.54 L) — 50/50 mixture of DEX-COOL and clean, drinkable water, Engine Oil (1.6L Eng): 5.30 QTS. (5.01 L) — API - SAE 5W-30 Note: Use engine oils with the dexos2 certification mark. Oils meeting the requirements of the vehicle should have the dexos2 certification mark on the container. This certification mark indicates that the oil has been approved to the dexos2 specification. Use of Substitute Engine Oils if dexos2 is unavailable: In the event that dexos2-approved engine oil is not available at an oil change or for maintaining proper oil level, you may use substitute engine oil that meets ACEA C3 of the appropriate viscosity grade. In an area of extreme cold, where the temperature falls below -29Deg.C (-20Deg.F), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures..
- How much engine oil does a 2019 Chevrolet Cruze take?
- Engine oil capacity depends on the engine and whether the filter is changed. Check the applicable manual for your exact vehicle and service procedure before filling.