Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2019 Buick EnvisionCoolant Type & Capacity
OEM spec from the factory service manual for the Base variant.
Quick Answer
Coolant Type
50/50 mixture of DEX-COOL and clean, drinkable water
Capacity
7.30 QTS.
6.9 L
Variant
Base
Note: After refill, the level must be checked. Add enough engine coolant so that the fluid is within the proper operating range.
Source: Factory service manual — 2019 Buick Envision Base. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of coolant does a 2019 Buick Envision take?
- The 2019 Buick Envision requires 50/50 mixture of DEX-COOL and clean, drinkable water. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Base configuration.
- How much coolant does a 2019 Buick Envision hold?
- The 2019 Buick Envision cooling system capacity is 7.30 QTS. (6.9 L).
- Can I use universal coolant in my 2019 Buick Envision?
- It is strongly recommended to use coolant that meets the 50/50 mixture of DEX-COOL and clean, drinkable water specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2019 Buick Envision?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.