2019 Bmw I3 Fluid Capacities

OEM fluid capacity chart from the factory service manual for the 2019-2021 (2019-2021).

Quick Answer

Air Cond Compressor Oil

β€” Refrigerant oil 1 Note: BMW Part No. 81 22 9 407 724. This oil (Refrigerant oil 1) may not be mixed with refrigerant oil Sanden SP-A2.

Automatic Transmission Fluid

0.53 QTS. (0.5 L) β€” Hypoid Axle Oil G3 (Fuchs Titan EG 4218)

Brake Fluid

β€” BMW Brake Fluid DOT 4 with low viscosity

Engine Coolant

8.67 QTS. (8.2 L) β€” Frostox HT-12 antifreeze and corrosion inhibitor

Engine Oil

2.75 QTS. (2.6 L) β€” BMW TwinPower Turbo SAE 0W-30

Notes

  • β†’BMW Part No. 81 22 9 407 724. This oil (Refrigerant oil 1) may not be mixed with refrigerant oil Sanden SP-A2.
  • β†’The nameplate in the engine compartment indicates which refrigerant has been used.
  • β†’Fill with water and - if required - with a washer antifreeze (according to manufacturer's recommendations). Mix the washer fluid before adding it to the reservoir.
Source: Factory service manual β€” 2019 Bmw I3 2019-2021.

This vehicle's factory manual

The spec is above. This opens the 2019 Bmw factory books so you can go into the I3 procedure.

Open the 2019 Bmw manual

Related for Your 2019 Bmw I3

Frequently Asked Questions

What are the fluid capacities for a 2019 Bmw I3?
The 2019 Bmw I3 fluid capacities are: Air Cond Compressor Oil: β€” Refrigerant oil 1 Note: BMW Part No. 81 22 9 407 724. This oil (Refrigerant oil 1) may not be mixed with refrigerant oil Sanden SP-A2., Automatic Transmission Fluid: 0.53 QTS. (0.5 L) β€” Hypoid Axle Oil G3 (Fuchs Titan EG 4218), Brake Fluid: β€” BMW Brake Fluid DOT 4 with low viscosity, Engine Coolant: 8.67 QTS. (8.2 L) β€” Frostox HT-12 antifreeze and corrosion inhibitor, Engine Oil: 2.75 QTS. (2.6 L) β€” BMW TwinPower Turbo SAE 0W-30.
How much engine oil does a 2019 Bmw I3 take?
The 2019 Bmw I3 takes 2.75 QTS. (2.6 L) β€” BMW TwinPower Turbo SAE 0W-30.