Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2019 Audi A6Coolant Type & Capacity
OEM spec from the factory service manual for the Premium Plus, 2.0L Eng VIN 8 variant.
Quick Answer
Coolant Type
See manual
Capacity
10.50 QTS.
9.93 L
Variant
Premium Plus, 2.0L Eng VIN 8
Note: Part No. G A13 A8J M1.
Part numbers are for reference only.
Approximate capacity.
Source: Factory service manual — 2019 Audi A6 Premium Plus, 2.0L Eng VIN 8. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of coolant does a 2019 Audi A6 take?
- The 2019 Audi A6 uses an OEM-specified coolant. Refer to the factory service manual for the exact type, as it varies by engine variant.
- How much coolant does a 2019 Audi A6 hold?
- The 2019 Audi A6 cooling system capacity is 10.50 QTS. (9.93 L).
- Can I use universal coolant in my 2019 Audi A6?
- Always use coolant that meets the OEM specification for your engine. Universal coolants may not provide adequate corrosion protection.
- What happens if I use the wrong coolant in my 2019 Audi A6?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.