Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2018 Volvo V90Coolant Type & Capacity
OEM spec from the factory service manual for the T5 Inscription variant.
Quick Answer
Coolant Type
50/50 mixture of VOLVO Antifreeze/Coolant or equivalent coolant with corrosion inhibitor and water
Capacity
8.70 QTS.
8.23 L
Variant
T5 Inscription
Note: The level should not exceed the yellow MAX mark inside the expansion tank.
This vehicle's factory manual
2018 Volvo V90: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Other specs:All specs
What You'll Need
Related for Your 2018 Volvo V90
Quick Actions
Frequently Asked Questions
- What type of coolant does a 2018 Volvo V90 take?
- The 2018 Volvo V90 requires 50/50 mixture of VOLVO Antifreeze/Coolant or equivalent coolant with corrosion inhibitor and water. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the T5 Inscription configuration.
- How much coolant does a 2018 Volvo V90 hold?
- The 2018 Volvo V90 cooling system capacity is 8.70 QTS. (8.23 L).
- Can I use universal coolant in my 2018 Volvo V90?
- It is strongly recommended to use coolant that meets the 50/50 mixture of VOLVO Antifreeze/Coolant or equivalent coolant with corrosion inhibitor and water specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2018 Volvo V90?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.