Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2018 Toyota Sequoia Fluid Capacities
OEM fluid capacity chart from the factory service manual for the 2016-2019 (2016-2019).
Quick Answer
Air Cond Compressor Oil
7.00 OZS. (0.2 L) — PAG 46 Note: Approximate capacity.
Automatic Transmission Fluid
11.70 QTS. (11.07 L) — TOYOTA Genuine Automatic Transmission Fluid Type WS Note: Using automatic transmission fluid other than Toyota Genuine ATF WS may cause deterioration in shift quality, locking up of your transmission accompanied by vibration, and ultimately damage the automatic transmission of your vehicle. The fluid capacity is the quantity of reference.
Brake Fluid
— SAE J1703 or FMVSS No. 116 DOT 3
Differential Gear Oil (4WD)
2.17 QTS. (2.05 L) — TOYOTA Genuine Differential Gear Oil LT SAE 75W-85 GL-5 or equivalent Note: Your Toyota vehicle is filled with Toyota Genuine Differential Gear Oil at the factory. Use Toyota approved Toyota Genuine Differential Gear Oil or an equivalent of matching quality to satisfy the specification.
Differential Gear Oil
1.64 QTS. (1.55 L) — TOYOTA Genuine Differential Gear Oil LT SAE 75W-85 GL-5 or equivalent Note: Your Toyota vehicle is filled with Toyota Genuine Differential Gear Oil at the factory. Use Toyota approved Toyota Genuine Differential Gear Oil or an equivalent of matching quality to satisfy the specification.
Engine Coolant
14.10 QTS. (13.34 L) — TOYOTA Super Long Life Coolant or similar high-quality ethylene glycol-based non-silicate, non-amine, non-nitrate and non-borate coolant with long-life hybrid organic acid technology Note: DO NOT use plain water alone. The fluid capacity is the quantity of reference.
Engine Oil
7.50 QTS. (7.09 L) — TOYOTA Genuine Motor Oil. SAE 0W-20 or equivalent ILSAC multigrade oil Note: SAE 0W-20 is the best choice for good fuel economy and good starting in cold weather. If SAE 0W-20 is not available, SAE 5W-20 oil may be used. However, it must be replaced with SAE 0W-20 at the next oil change. The engine oil capacity is a reference quantity to be used when changing the engine oil. Warm up and turn off the engine, wait more than 5 minutes, and check the oil level on the dipstick.
Power Steering Fluid
— Automatic Transmission Fluid DEXRON II or DEXRON III
Transfer Case Fluid
1.43 QTS. (1.35 L) — API - GL- 5, SAE 75W-90 Gear Oil
Notes
- →Approximate capacity.
- →Using automatic transmission fluid other than Toyota Genuine ATF WS may cause deterioration in shift quality, locking up of your transmission accompanied by vibration, and ultimately damage the automatic transmission of your vehicle. The fluid capacity is the quantity of reference.
- →Your Toyota vehicle is filled with Toyota Genuine Differential Gear Oil at the factory. Use Toyota approved Toyota Genuine Differential Gear Oil or an equivalent of matching quality to satisfy the specification.
- →DO NOT use plain water alone. The fluid capacity is the quantity of reference.
- →SAE 0W-20 is the best choice for good fuel economy and good starting in cold weather. If SAE 0W-20 is not available, SAE 5W-20 oil may be used. However, it must be replaced with SAE 0W-20 at the next oil change. The engine oil capacity is a reference quantity to be used when changing the engine oil. Warm up and turn off the engine, wait more than 5 minutes, and check the oil level on the dipstick.
- →In cold areas where temperatures range below the freezing point, use washer fluid containing antifreeze.
This vehicle's factory manual
2018 Toyota Sequoia: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Related for Your 2018 Toyota Sequoia
Frequently Asked Questions
- What are the fluid capacities for a 2018 Toyota Sequoia?
- The 2018 Toyota Sequoia fluid capacities are: Air Cond Compressor Oil: 7.00 OZS. (0.2 L) — PAG 46 Note: Approximate capacity., Automatic Transmission Fluid: 11.70 QTS. (11.07 L) — TOYOTA Genuine Automatic Transmission Fluid Type WS Note: Using automatic transmission fluid other than Toyota Genuine ATF WS may cause deterioration in shift quality, locking up of your transmission accompanied by vibration, and ultimately damage the automatic transmission of your vehicle. The fluid capacity is the quantity of reference., Brake Fluid: — SAE J1703 or FMVSS No. 116 DOT 3, Differential Gear Oil (4WD): 2.17 QTS. (2.05 L) — TOYOTA Genuine Differential Gear Oil LT SAE 75W-85 GL-5 or equivalent Note: Your Toyota vehicle is filled with Toyota Genuine Differential Gear Oil at the factory. Use Toyota approved Toyota Genuine Differential Gear Oil or an equivalent of matching quality to satisfy the specification., Differential Gear Oil: 1.64 QTS. (1.55 L) — TOYOTA Genuine Differential Gear Oil LT SAE 75W-85 GL-5 or equivalent Note: Your Toyota vehicle is filled with Toyota Genuine Differential Gear Oil at the factory. Use Toyota approved Toyota Genuine Differential Gear Oil or an equivalent of matching quality to satisfy the specification., Engine Coolant: 14.10 QTS. (13.34 L) — TOYOTA Super Long Life Coolant or similar high-quality ethylene glycol-based non-silicate, non-amine, non-nitrate and non-borate coolant with long-life hybrid organic acid technology Note: DO NOT use plain water alone. The fluid capacity is the quantity of reference., Engine Oil: 7.50 QTS. (7.09 L) — TOYOTA Genuine Motor Oil. SAE 0W-20 or equivalent ILSAC multigrade oil Note: SAE 0W-20 is the best choice for good fuel economy and good starting in cold weather. If SAE 0W-20 is not available, SAE 5W-20 oil may be used. However, it must be replaced with SAE 0W-20 at the next oil change. The engine oil capacity is a reference quantity to be used when changing the engine oil. Warm up and turn off the engine, wait more than 5 minutes, and check the oil level on the dipstick., Power Steering Fluid: — Automatic Transmission Fluid DEXRON II or DEXRON III, Transfer Case Fluid: 1.43 QTS. (1.35 L) — API - GL- 5, SAE 75W-90 Gear Oil.
- How much engine oil does a 2018 Toyota Sequoia take?
- The 2018 Toyota Sequoia takes 7.50 QTS. (7.09 L) — TOYOTA Genuine Motor Oil. SAE 0W-20 or equivalent ILSAC multigrade oil Note: SAE 0W-20 is the best choice for good fuel economy and good starting in cold weather. If SAE 0W-20 is not available, SAE 5W-20 oil may be used. However, it must be replaced with SAE 0W-20 at the next oil change. The engine oil capacity is a reference quantity to be used when changing the engine oil. Warm up and turn off the engine, wait more than 5 minutes, and check the oil level on the dipstick..