Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2018 Toyota 86Oil Type & Capacity
OEM spec from the factory service manual for the Base, Automatic Trans variant.
Quick Answer
Oil Type
$TOYOTA Genuine Motor Oil. SAE 0W-20 or equivalent ILSAC GF-5 multigrade engine oil
Capacity (w/ Filter)
5.70 QTS.
5.39 L
Variant
Base, Automatic Trans
Note: SAE 0W-20 is the best choice for good fuel economy and good starting in cold weather. If SAE 0W-20 is not available, SAE 5W-20 oil may be used. However, it must be replaced with SAE 0W-20 at the next oil change.
The engine oil capacity is a reference quantity to be used when exchanging. Warm up the engine and turn off the hybrid system, wait more than 5 minutes, and check the oil level on the dipstick.
This vehicle's factory manual
2018 Toyota 86: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
What You'll Need
Related for Your 2018 Toyota 86
Frequently Asked Questions
- What type of oil does a 2018 Toyota 86 take?
- The 2018 Toyota 86 requires TOYOTA Genuine Motor Oil. SAE 0W-20 or equivalent ILSAC GF-5 multigrade engine oil. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Base, Automatic Trans configuration.
- How much oil does a 2018 Toyota 86 need?
- The 2018 Toyota 86 takes 5.70 QTS. (5.39 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2018 Toyota 86?
- Yes — synthetic oil that meets the TOYOTA Genuine Motor Oil. SAE 0W-20 or equivalent ILSAC GF-5 multigrade engine oil specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2018 Toyota 86?
- Using oil that does not meet the TOYOTA Genuine Motor Oil. SAE 0W-20 or equivalent ILSAC GF-5 multigrade engine oil specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.