Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2018 Subaru BRZOil Type & Capacity
OEM spec from the factory service manual for the Limited, Automatic Trans variant.
Quick Answer
Oil Type
ILSAC Multigrade Engine Oil. API - SAE 0W-20 Synthetic Oil Recommended
Capacity (w/ Filter)
5.70 QTS.
5.39 L
Variant
Limited, Automatic Trans
Note: The engine oil capacity is a reference quantity to be used when changing the engine oil. Warm up and turn off the engine, wait more than 5 minutes, and check the oil level on the dipstick.
Source: Factory service manual — 2018 Subaru BRZ Limited, Automatic Trans. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of oil does a 2018 Subaru BRZ take?
- The 2018 Subaru BRZ requires ILSAC Multigrade Engine Oil. API - SAE 0W-20 Synthetic Oil Recommended. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Limited, Automatic Trans configuration.
- How much oil does a 2018 Subaru BRZ need?
- The 2018 Subaru BRZ takes 5.70 QTS. (5.39 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2018 Subaru BRZ?
- Yes — synthetic oil that meets the ILSAC Multigrade Engine Oil. API - SAE 0W-20 Synthetic Oil Recommended specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2018 Subaru BRZ?
- Using oil that does not meet the ILSAC Multigrade Engine Oil. API - SAE 0W-20 Synthetic Oil Recommended specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.