Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2018 Honda FitCoolant Type & Capacity
OEM spec from the factory service manual for the EX, Automatic CVT Trans variant.
Quick Answer
Coolant Type
HONDA Long-Life Antifreeze/Coolant Type 2
Capacity
4.00 QTS.
3.78 L
Variant
EX, Automatic CVT Trans
Note: This coolant is pre-mixed with 50/50 antifreeze and distilled water. Never add straight antifreeze or plain water.
Includes: the coolant in the reserve tank and that remaining in the engine.
This vehicle's factory manual
The coolant spec is above. This opens the fluids section of the 2018 Honda Fit EX, Automatic CVT Trans factory book.
What You'll Need
Related for Your 2018 Honda Fit
Frequently Asked Questions
- What type of coolant does a 2018 Honda Fit take?
- The 2018 Honda Fit requires HONDA Long-Life Antifreeze/Coolant Type 2. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the EX, Automatic CVT Trans configuration.
- How much coolant does a 2018 Honda Fit hold?
- The 2018 Honda Fit cooling system capacity is 4.00 QTS. (3.78 L).
- Can I use universal coolant in my 2018 Honda Fit?
- It is strongly recommended to use coolant that meets the HONDA Long-Life Antifreeze/Coolant Type 2 specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2018 Honda Fit?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.