Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2018 Ford TaurusOil Type & Capacity
OEM spec from the factory service manual for the Limited, AWD, Gas variant.
Quick Answer
Oil Type
MOTORCRAFT SAE 5W-20 Synthetic Blend Motor Oil or MOTORCRAFT SAE 5W-20 Full Synthetic Motor Oil
Capacity (w/ Filter)
6.00 QTS.
5.67 L
Variant
Limited, AWD, Gas
Note: SAE 0W-20 is the best choice for good fuel economy and good starting in cold weather.
Source: Factory service manual — 2018 Ford Taurus Limited, AWD, Gas. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of oil does a 2018 Ford Taurus take?
- The 2018 Ford Taurus requires MOTORCRAFT SAE 5W-20 Synthetic Blend Motor Oil or MOTORCRAFT SAE 5W-20 Full Synthetic Motor Oil. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Limited, AWD, Gas configuration.
- How much oil does a 2018 Ford Taurus need?
- The 2018 Ford Taurus takes 6.00 QTS. (5.67 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2018 Ford Taurus?
- Yes — synthetic oil that meets the MOTORCRAFT SAE 5W-20 Synthetic Blend Motor Oil or MOTORCRAFT SAE 5W-20 Full Synthetic Motor Oil specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2018 Ford Taurus?
- Using oil that does not meet the MOTORCRAFT SAE 5W-20 Synthetic Blend Motor Oil or MOTORCRAFT SAE 5W-20 Full Synthetic Motor Oil specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.