2018 Ford MustangOil Type & Capacity

OEM spec from the factory service manual for the EcoBoost Premium, 2D Convertible, Automatic Trans variant.

Quick Answer

Oil Type

$MOTORCRAFT Premium Synthetic Blend Motor Oil, SAE 5W-30 Motor Oil

Capacity (w/ Filter)

5.70 QTS.

5.39 L

Variant

EcoBoost Premium, 2D Convertible, Automatic Trans

Note: SAE 0W-30 oil may be used in cold temperature operations: In an area of extreme cold, where the temperature falls below -29Deg.C (-20Deg.F).

This vehicle's factory manual

2018 Ford Mustang: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.

Open this vehicle’s service manual
Sister site: See this spec on WhatTypeOfOil.com β€” our quick oil type & capacity lookup for every vehicle.

Related for Your 2018 Ford Mustang

Frequently Asked Questions

What type of oil does a 2018 Ford Mustang take?
The 2018 Ford Mustang requires MOTORCRAFT Premium Synthetic Blend Motor Oil, SAE 5W-30 Motor Oil. The exact spec may vary slightly by engine variant β€” this page shows the OEM recommendation for the EcoBoost Premium, 2D Convertible, Automatic Trans configuration.
How much oil does a 2018 Ford Mustang need?
The 2018 Ford Mustang takes 5.70 QTS. (5.39 L) of engine oil with the filter replaced.
Can I use synthetic oil in my 2018 Ford Mustang?
Yes β€” synthetic oil that meets the MOTORCRAFT Premium Synthetic Blend Motor Oil, SAE 5W-30 Motor Oil specification is acceptable and often preferred for better protection and longer change intervals.
What happens if I use the wrong oil in my 2018 Ford Mustang?
Using oil that does not meet the MOTORCRAFT Premium Synthetic Blend Motor Oil, SAE 5W-30 Motor Oil specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.