Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2018 Ford FusionCoolant Type & Capacity
OEM spec from the factory service manual for the SE, 1.5L Eng VIN D variant.
Quick Answer
Coolant Type
MOTORCRAFT Orange Antifreeze/Coolant Prediluted
Capacity
10.90 QTS.
10.31 L
Variant
SE, 1.5L Eng VIN D
Note: Add the coolant type originally equipped in the vehicle.
Indicates only approximate dry fill capacity. Some applications may vary.
Source: Factory service manual — 2018 Ford Fusion SE, 1.5L Eng VIN D. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of coolant does a 2018 Ford Fusion take?
- The 2018 Ford Fusion requires MOTORCRAFT Orange Antifreeze/Coolant Prediluted. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the SE, 1.5L Eng VIN D configuration.
- How much coolant does a 2018 Ford Fusion hold?
- The 2018 Ford Fusion cooling system capacity is 10.90 QTS. (10.31 L).
- Can I use universal coolant in my 2018 Ford Fusion?
- It is strongly recommended to use coolant that meets the MOTORCRAFT Orange Antifreeze/Coolant Prediluted specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2018 Ford Fusion?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.