Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2018 Ford Focus Fluid Capacities
OEM fluid capacity chart from the factory service manual for the 2018 (2018).
Quick Answer
Air Cond Compressor Oil (Electric)
5.20 OZS. (0.15 L) — POE YN-34
Automatic Transmission Fluid (Electric)
1.30 QTS. (1.23 L) — MOTORCRAFT Automatic Transmission Fluid MERCON LV Note: Approximate dry fill capacity. Actual amount may vary during fluid changes.
Brake Fluid
— MOTORCRAFT DOT 4 Low Viscosity (LV) High Performance Brake Fluid, or equivalent.
Engine Coolant (Electric)
15.90 QTS. (15.04 L) — MOTORCRAFT Orange Antifreeze/Coolant Prediluted
Air Cond Compressor Oil (Gas,2.3L Eng)
4.40 OZS. (0.13 L) — PAG YN-35
Engine Coolant (2.3L Eng)
7.29 QTS. (6.89 L) — MOTORCRAFT Orange Antifreeze/Coolant Prediluted
Engine Oil (2.3L Eng)
5.70 QTS. (5.39 L) — MOTORCRAFT SAE 5W-50 Full Synthetic Motor Oil
Manual Transmission Fluid (Trans Mfr CD MMT6)
1.74 QTS. (1.64 L) — MOTORCRAFT Dual Clutch Transmission Fluid XT-11-QDC
Air Cond Compressor Oil (Gas,2.0L Eng)
4.10 OZS. (0.12 L) — PAG YN-35
Automatic Transmission Fluid (2.0L Eng,Trans Mfr CD DPS6)
1.80 QTS. (1.7 L) — MOTORCRAFT Dual Clutch Transmission Fluid XT-11-QDC
Engine Coolant (2.0L Eng)
6.82 QTS. (6.45 L) — MOTORCRAFT Orange Antifreeze/Coolant Prediluted
Engine Oil (2.0L Eng,Normally Aspirated)
4.54 QTS. (4.29 L) — MOTORCRAFT SAE 5W-20 Premium Synthetic Blend Motor Oil. Optional: Full Synthetic Motor Oil Note: FORD recommends Motorcraft Motor Oil. If Motorcraft Motor Oil is not available, use Motor Oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines. Do not use oil labeled with API SN service category unless the label also displays the API certification mark. DO NOT use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage not covered by your Ford warranty.
Manual Transmission Fluid (Trans Mfr CD MTX75)
2.00 QTS. (1.89 L) — 2.0L Duratec-HE 118kW/160PS
Air Cond Compressor Oil (Gas,1.0L Eng)
4.10 OZS. (0.12 L) — PAG YN-35
Automatic Transmission Fluid (1.0L Eng,Trans Mfr CD 6F15)
9.10 QTS. (8.61 L) — MOTORCRAFT Automatic Transmission Fluid MERCON ULV Note: Approximate dry fill capacity. Actual amount may vary during fluid changes.
Engine Coolant (1.0L Eng)
6.10 QTS. (5.77 L) — MOTORCRAFT Orange Antifreeze/Coolant Prediluted
Engine Oil (1.0L Eng)
4.00 QTS. (3.78 L) — MOTORCRAFT SAE 5W-20 Premium Synthetic Blend Motor Oil. Optional: Full Synthetic Motor Oil Note: FORD recommends Motorcraft Motor Oil. If Motorcraft Motor Oil is not available, use Motor Oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines. Do not use oil labeled with API SN service category unless the label also displays the API certification mark. DO NOT use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage not covered by your Ford warranty.
Manual Transmission Fluid (Trans Mfr CD B6)
1.75 QTS. (1.65 L) — MOTORCRAFT Dual Clutch Transmission Fluid XT-11-QDC
Engine Oil (2.0L Eng,Turbocharger)
5.70 QTS. (5.39 L) — MOTORCRAFT SAE 5W-30 Premium Synthetic Blend Motor Oil. Optional: Full Synthetic Motor Oil Note: FORD recommends Motorcraft Motor Oil. If Motorcraft Motor Oil is not available, use Motor Oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines. Do not use oil labeled with API SN service category unless the label also displays the API certification mark. DO NOT use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage not covered by your Ford warranty.
Notes
- →Approximate dry fill capacity. Actual amount may vary during fluid changes.
- →Follow the Manufacturer's Instructions for the mixture ratio.
- →FORD recommends Motorcraft Motor Oil. If Motorcraft Motor Oil is not available, use Motor Oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines. Do not use oil labeled with API SN service category unless the label also displays the API certification mark. DO NOT use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage not covered by your Ford warranty.
This vehicle's factory manual
2018 Ford Focus: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Related for Your 2018 Ford Focus
Frequently Asked Questions
- What are the fluid capacities for a 2018 Ford Focus?
- The 2018 Ford Focus fluid capacities are: Air Cond Compressor Oil (Electric): 5.20 OZS. (0.15 L) — POE YN-34, Automatic Transmission Fluid (Electric): 1.30 QTS. (1.23 L) — MOTORCRAFT Automatic Transmission Fluid MERCON LV Note: Approximate dry fill capacity. Actual amount may vary during fluid changes., Brake Fluid: — MOTORCRAFT DOT 4 Low Viscosity (LV) High Performance Brake Fluid, or equivalent., Engine Coolant (Electric): 15.90 QTS. (15.04 L) — MOTORCRAFT Orange Antifreeze/Coolant Prediluted, Air Cond Compressor Oil (Gas,2.3L Eng): 4.40 OZS. (0.13 L) — PAG YN-35, Engine Coolant (2.3L Eng): 7.29 QTS. (6.89 L) — MOTORCRAFT Orange Antifreeze/Coolant Prediluted, Engine Oil (2.3L Eng): 5.70 QTS. (5.39 L) — MOTORCRAFT SAE 5W-50 Full Synthetic Motor Oil, Manual Transmission Fluid (Trans Mfr CD MMT6): 1.74 QTS. (1.64 L) — MOTORCRAFT Dual Clutch Transmission Fluid XT-11-QDC, Air Cond Compressor Oil (Gas,2.0L Eng): 4.10 OZS. (0.12 L) — PAG YN-35, Automatic Transmission Fluid (2.0L Eng,Trans Mfr CD DPS6): 1.80 QTS. (1.7 L) — MOTORCRAFT Dual Clutch Transmission Fluid XT-11-QDC, Engine Coolant (2.0L Eng): 6.82 QTS. (6.45 L) — MOTORCRAFT Orange Antifreeze/Coolant Prediluted, Engine Oil (2.0L Eng,Normally Aspirated): 4.54 QTS. (4.29 L) — MOTORCRAFT SAE 5W-20 Premium Synthetic Blend Motor Oil. Optional: Full Synthetic Motor Oil Note: FORD recommends Motorcraft Motor Oil. If Motorcraft Motor Oil is not available, use Motor Oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines. Do not use oil labeled with API SN service category unless the label also displays the API certification mark. DO NOT use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage not covered by your Ford warranty., Manual Transmission Fluid (Trans Mfr CD MTX75): 2.00 QTS. (1.89 L) — 2.0L Duratec-HE 118kW/160PS, Air Cond Compressor Oil (Gas,1.0L Eng): 4.10 OZS. (0.12 L) — PAG YN-35, Automatic Transmission Fluid (1.0L Eng,Trans Mfr CD 6F15): 9.10 QTS. (8.61 L) — MOTORCRAFT Automatic Transmission Fluid MERCON ULV Note: Approximate dry fill capacity. Actual amount may vary during fluid changes., Engine Coolant (1.0L Eng): 6.10 QTS. (5.77 L) — MOTORCRAFT Orange Antifreeze/Coolant Prediluted, Engine Oil (1.0L Eng): 4.00 QTS. (3.78 L) — MOTORCRAFT SAE 5W-20 Premium Synthetic Blend Motor Oil. Optional: Full Synthetic Motor Oil Note: FORD recommends Motorcraft Motor Oil. If Motorcraft Motor Oil is not available, use Motor Oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines. Do not use oil labeled with API SN service category unless the label also displays the API certification mark. DO NOT use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage not covered by your Ford warranty., Manual Transmission Fluid (Trans Mfr CD B6): 1.75 QTS. (1.65 L) — MOTORCRAFT Dual Clutch Transmission Fluid XT-11-QDC, Engine Oil (2.0L Eng,Turbocharger): 5.70 QTS. (5.39 L) — MOTORCRAFT SAE 5W-30 Premium Synthetic Blend Motor Oil. Optional: Full Synthetic Motor Oil Note: FORD recommends Motorcraft Motor Oil. If Motorcraft Motor Oil is not available, use Motor Oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines. Do not use oil labeled with API SN service category unless the label also displays the API certification mark. DO NOT use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage not covered by your Ford warranty..
- How much engine oil does a 2018 Ford Focus take?
- The 2018 Ford Focus takes 5.20 OZS. (0.15 L) — POE YN-34.