2018 Ford FiestaOil Type & Capacity

OEM spec from the factory service manual for the S, 4D Hatchback, Automatic DCT Trans variant.

Quick Answer

Oil Type

$MOTORCRAFT SAE 5W-20 Synthetic Blend Motor Oil

Capacity (w/ Filter)

4.40 QTS.

4.16 L

Variant

S, 4D Hatchback, Automatic DCT Trans

Note: To improve engine cold start performance use: MOTORCRAFT SAE 0W-20 Synthetic Blend Motor Oil.

This vehicle's factory manual

2018 Ford Fiesta: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.

Open this vehicle’s service manual
Sister site: See this spec on WhatTypeOfOil.com β€” our quick oil type & capacity lookup for every vehicle.

Related for Your 2018 Ford Fiesta

Frequently Asked Questions

What type of oil does a 2018 Ford Fiesta take?
The 2018 Ford Fiesta requires MOTORCRAFT SAE 5W-20 Synthetic Blend Motor Oil. The exact spec may vary slightly by engine variant β€” this page shows the OEM recommendation for the S, 4D Hatchback, Automatic DCT Trans configuration.
How much oil does a 2018 Ford Fiesta need?
The 2018 Ford Fiesta takes 4.40 QTS. (4.16 L) of engine oil with the filter replaced.
Can I use synthetic oil in my 2018 Ford Fiesta?
Yes β€” synthetic oil that meets the MOTORCRAFT SAE 5W-20 Synthetic Blend Motor Oil specification is acceptable and often preferred for better protection and longer change intervals.
What happens if I use the wrong oil in my 2018 Ford Fiesta?
Using oil that does not meet the MOTORCRAFT SAE 5W-20 Synthetic Blend Motor Oil specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.