Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2018 Ford ExpeditionCoolant Type & Capacity
OEM spec from the factory service manual for the Limited, 4WD variant.
Quick Answer
Coolant Type
MOTORCRAFT Orange Antifreeze/Coolant Prediluted
Capacity
18.50 QTS.
17.5 L
Variant
Limited, 4WD
Note: Add the coolant type originally equipped in the vehicle.
This vehicle's factory manual
The coolant spec is above. This opens the fluids section of the 2018 Ford Expedition Limited, 4WD factory book.
What You'll Need
Related for Your 2018 Ford Expedition
Frequently Asked Questions
- What type of coolant does a 2018 Ford Expedition take?
- The 2018 Ford Expedition requires MOTORCRAFT Orange Antifreeze/Coolant Prediluted. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Limited, 4WD configuration.
- How much coolant does a 2018 Ford Expedition hold?
- The 2018 Ford Expedition cooling system capacity is 18.50 QTS. (17.5 L).
- Can I use universal coolant in my 2018 Ford Expedition?
- It is strongly recommended to use coolant that meets the MOTORCRAFT Orange Antifreeze/Coolant Prediluted specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2018 Ford Expedition?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.