Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2018 Chevrolet TraverseOil Type & Capacity
OEM spec from the factory service manual for the High Country variant.
Quick Answer
Oil Type
$API - SAE 5W-30
Capacity (w/ Filter)
6.00 QTS.
5.67 L
Variant
High Country
Note: Use only engine oil licensed to the dexos1 specification or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended.
SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity grade oils such as SAE 10W-30, 10W-40, or 20W-50.
If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
This vehicle's factory manual
2018 Chevrolet Traverse: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
What You'll Need
Related for Your 2018 Chevrolet Traverse
Frequently Asked Questions
- What type of oil does a 2018 Chevrolet Traverse take?
- The 2018 Chevrolet Traverse requires API - SAE 5W-30. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the High Country configuration.
- How much oil does a 2018 Chevrolet Traverse need?
- The 2018 Chevrolet Traverse takes 6.00 QTS. (5.67 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2018 Chevrolet Traverse?
- Yes — synthetic oil that meets the API - SAE 5W-30 specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2018 Chevrolet Traverse?
- Using oil that does not meet the API - SAE 5W-30 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.