2018 Chevrolet SparkOil Type & Capacity

OEM spec from the factory service manual for the ACTIV, Automatic CVT Trans variant.

Quick Answer

Oil Type

$API - SAE 0W-20

Capacity (w/ Filter)

4.23 QTS.

4 L

Variant

ACTIV, Automatic CVT Trans

Note: Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.

This vehicle's factory manual

2018 Chevrolet Spark: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.

Open this vehicle’s service manual
Sister site: See this spec on WhatTypeOfOil.com β€” our quick oil type & capacity lookup for every vehicle.

Related for Your 2018 Chevrolet Spark

Frequently Asked Questions

What type of oil does a 2018 Chevrolet Spark take?
The 2018 Chevrolet Spark requires API - SAE 0W-20. The exact spec may vary slightly by engine variant β€” this page shows the OEM recommendation for the ACTIV, Automatic CVT Trans configuration.
How much oil does a 2018 Chevrolet Spark need?
The 2018 Chevrolet Spark takes 4.23 QTS. (4 L) of engine oil with the filter replaced.
Can I use synthetic oil in my 2018 Chevrolet Spark?
Yes β€” synthetic oil that meets the API - SAE 0W-20 specification is acceptable and often preferred for better protection and longer change intervals.
What happens if I use the wrong oil in my 2018 Chevrolet Spark?
Using oil that does not meet the API - SAE 0W-20 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.