Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2018 Chevrolet Impala Premier Fluid Capacities
OEM fluid capacity chart from the factory service manual for the 2018-2019 (2018-2019).
Quick Answer
Air Cond Compressor Oil
5.10 OZS. (0.15 L) — PAG 46
Automatic Transmission Fluid
— Automatic Transmission Fluid DEXRON VI Note: Fluid Capacity is between: 5.3 to 7.4 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Automatic Transmission Fluid (Trans Mfr CD 6T70/M7W)
— Automatic Transmission Fluid DEXRON VI Note: Fluid Capacity is between: 7.4 - 9.5 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Brake Fluid
— DOT 3 Hydraulic Brake Fluid
Engine Coolant (3.6L Eng)
9.90 QTS. (9.36 L) — 50/50 mixture of DEX-COOL and clean, drinkable water Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Engine Oil (3.6L Eng)
6.00 QTS. (5.67 L) — API - SAE 5W-30 Note: Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
Notes
- →Fluid Capacity is between: 4.2 to 6.3 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
- →Fluid Capacity is between: 7.4 - 9.5 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
- →Fluid Capacity is between: 5.3 to 7.4 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
- →All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
- →Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
- →Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements.
This vehicle's factory manual
The spec is above. This opens the 2018 Chevrolet factory books so you can go into the Impala Premier procedure.
Related for Your 2018 Chevrolet Impala Premier
Frequently Asked Questions
- What are the fluid capacities for a 2018 Chevrolet Impala Premier?
- The 2018 Chevrolet Impala Premier fluid capacities are: Air Cond Compressor Oil: 5.10 OZS. (0.15 L) — PAG 46, Automatic Transmission Fluid: — Automatic Transmission Fluid DEXRON VI Note: Fluid Capacity is between: 5.3 to 7.4 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling., Automatic Transmission Fluid (Trans Mfr CD 6T70/M7W): — Automatic Transmission Fluid DEXRON VI Note: Fluid Capacity is between: 7.4 - 9.5 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling., Brake Fluid: — DOT 3 Hydraulic Brake Fluid, Engine Coolant (3.6L Eng): 9.90 QTS. (9.36 L) — 50/50 mixture of DEX-COOL and clean, drinkable water Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling., Engine Oil (3.6L Eng): 6.00 QTS. (5.67 L) — API - SAE 5W-30 Note: Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos..
- How much engine oil does a 2018 Chevrolet Impala Premier take?
- The 2018 Chevrolet Impala Premier takes 5.10 OZS. (0.15 L) — PAG 46.