Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2018 Audi A6Coolant Type & Capacity
OEM spec from the factory service manual for the Premium variant.
Quick Answer
Coolant Type
See manual
Capacity
10.50 QTS.
9.93 L
Variant
Premium
Note: Part No. G A13 A8J M1.
Part numbers are for reference only.
Approximate capacity.
This vehicle's factory manual
2018 Audi A6: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Other specs:All specs
What You'll Need
Related for Your 2018 Audi A6
Quick Actions
Frequently Asked Questions
- What type of coolant does a 2018 Audi A6 take?
- The 2018 Audi A6 uses an OEM-specified coolant. Refer to the factory service manual for the exact type, as it varies by engine variant.
- How much coolant does a 2018 Audi A6 hold?
- The 2018 Audi A6 cooling system capacity is 10.50 QTS. (9.93 L).
- Can I use universal coolant in my 2018 Audi A6?
- Always use coolant that meets the OEM specification for your engine. Universal coolants may not provide adequate corrosion protection.
- What happens if I use the wrong coolant in my 2018 Audi A6?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.