Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2017 Toyota Sienna Fluid Capacities
OEM fluid capacity chart from the factory service manual for the 2017 (2017).
Quick Answer
Automatic Transmission Fluid
8.00 QTS. (7.57 L) — TOYOTA Genuine Automatic Transmission Fluid Type WS Note: Using transmission fluid other than TOYOTA Genuine ATF WS may cause deterioration in shift quality, locking up of your transmission acompanied by vibration, and ultimately damage the transmission of your vehicle. The fluid capacity is the quantity of reference.
Brake Fluid
— SAE J1703 or FMVSS No. 116 DOT 3
Engine Coolant
12.50 QTS. (11.82 L) — TOYOTA Super Long Life Coolant or similar high-quality ethylene glycol-based non-silicate, non-amine, non-nitrate and non-borate coolant with long-life hybrid organic acid technology Note: DO NOT use plain water alone. The fluid capacity is the quantity of reference.
Engine Oil
5.60 QTS. (5.29 L) — TOYOTA Genuine Motor Oil. SAE 0W-20 or equivalent ILSAC GF-5 multigrade oil Note: If SAE 0W-20 is not available, SAE 5W-20 may be used. However, it must be replaced with SAE 0W-20 at the next oil change.
Transfer Case Fluid
0.80 QTS. (0.75 L) — TOYOTA Genuine Differential Gear Oil LT SAE 75W-85 GL-5 or equivalent
Differential Gear Oil (AWD)
0.50 QTS. (0.47 L) — TOYOTA Genuine Differential Gear Oil LT SAE 75W-85 GL-5 or equivalent
Notes
- →Approximate capacity.
- →Using transmission fluid other than TOYOTA Genuine ATF WS may cause deterioration in shift quality, locking up of your transmission acompanied by vibration, and ultimately damage the transmission of your vehicle. The fluid capacity is the quantity of reference.
- →DO NOT use plain water alone. The fluid capacity is the quantity of reference.
- →If SAE 0W-20 is not available, SAE 5W-20 may be used. However, it must be replaced with SAE 0W-20 at the next oil change.
- →In cold areas where temperatures range below the freezing point, use washer fluid containing antifreeze.
This vehicle's factory manual
2017 Toyota Sienna: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Related for Your 2017 Toyota Sienna
Frequently Asked Questions
- What are the fluid capacities for a 2017 Toyota Sienna?
- The 2017 Toyota Sienna fluid capacities are: Automatic Transmission Fluid: 8.00 QTS. (7.57 L) — TOYOTA Genuine Automatic Transmission Fluid Type WS Note: Using transmission fluid other than TOYOTA Genuine ATF WS may cause deterioration in shift quality, locking up of your transmission acompanied by vibration, and ultimately damage the transmission of your vehicle. The fluid capacity is the quantity of reference., Brake Fluid: — SAE J1703 or FMVSS No. 116 DOT 3, Engine Coolant: 12.50 QTS. (11.82 L) — TOYOTA Super Long Life Coolant or similar high-quality ethylene glycol-based non-silicate, non-amine, non-nitrate and non-borate coolant with long-life hybrid organic acid technology Note: DO NOT use plain water alone. The fluid capacity is the quantity of reference., Engine Oil: 5.60 QTS. (5.29 L) — TOYOTA Genuine Motor Oil. SAE 0W-20 or equivalent ILSAC GF-5 multigrade oil Note: If SAE 0W-20 is not available, SAE 5W-20 may be used. However, it must be replaced with SAE 0W-20 at the next oil change., Transfer Case Fluid: 0.80 QTS. (0.75 L) — TOYOTA Genuine Differential Gear Oil LT SAE 75W-85 GL-5 or equivalent, Differential Gear Oil (AWD): 0.50 QTS. (0.47 L) — TOYOTA Genuine Differential Gear Oil LT SAE 75W-85 GL-5 or equivalent.
- How much engine oil does a 2017 Toyota Sienna take?
- The 2017 Toyota Sienna takes 5.60 QTS. (5.29 L) — TOYOTA Genuine Motor Oil. SAE 0W-20 or equivalent ILSAC GF-5 multigrade oil Note: If SAE 0W-20 is not available, SAE 5W-20 may be used. However, it must be replaced with SAE 0W-20 at the next oil change..