Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2017 Toyota 86 Fluid Capacities
OEM fluid capacity chart from the factory service manual for the 2017 (2017).
Quick Answer
Automatic Transmission Fluid
7.90 QTS. (7.47 L) — TOYOTA Genuine Automatic Transmission Fluid Type WS Note: Using transmission fluid other than TOYOTA Genuine ATF WS may cause deterioration in shift quality, locking up of your transmission acompanied by vibration, and ultimately damage the transmission of your vehicle. The fluid capacity is the quantity of reference.
Brake Fluid
— SAE J1703 or FMVSS No. 116 DOT 3
Differential Gear Oil
1.20 QTS. (1.13 L) — TOYOTA Genuine Differential Gear Oil LX. Ohter LSD gear oil that meets API GL-5 and SAE 75W-85 Note: Your Toyota vehicle is filled with Toyota Genuine Differential Gear Oil at the factory. Use Toyota approved Toyota Genuine Differential Gear Oil or an equivalent of matching quality to satisfy the specification. Using a differential gear oil other than specified may cause occurrences of rattling noises while idling and poor fuel consumption. Never use different brands together.
Engine Coolant (Automatic Trans)
7.90 QTS. (7.47 L) — TOYOTA Super Long Life Coolant BLUE or similar high-quality ethylene glycol-based non-silicate, non-amine, non-nitrate and non-borate coolant with long-life hybrid organic acid technology
Engine Oil
5.20 QTS. (4.92 L) — TOYOTA Genuine Motor Oil. SAE 0W-20 or equivalent ILSAC multigrade oil Note: SAE 0W-20 is the best choice for good fuel economy and good starting in cold weather. If SAE 0W-20 is not available, SAE 5W-20 oil may be used. However, it must be replaced with SAE 0W-20 at the next oil change. The engine oil capacity is a reference quantity to be used when exchanging. Warm up the engine and turn off the hybrid system, wait more than 5 minutes, and check the oil level on the dipstick.
Manual Transmission Fluid
2.30 QTS. (2.17 L) — TOYOYA Genuine MG Gear Oil special II. Other gear oil that meets API GL-3 and SAE 75W-90 Note: The recommended oil grade is API GL-3, however, API GL-4 can also be used. Using a manual transmission gear oil other than TOYOTA Genuine MG Gear Oil special II may cause occurrences of rattling noises while idling and poor fuel consumption.Never use different brands together.
Engine Coolant (Standard Trans)
7.60 QTS. (7.19 L) — TOYOTA Super Long Life Coolant BLUE or similar high-quality ethylene glycol-based non-silicate, non-amine, non-nitrate and non-borate coolant with long-life hybrid organic acid technology
Notes
- →Using transmission fluid other than TOYOTA Genuine ATF WS may cause deterioration in shift quality, locking up of your transmission acompanied by vibration, and ultimately damage the transmission of your vehicle. The fluid capacity is the quantity of reference.
- →Your Toyota vehicle is filled with Toyota Genuine Differential Gear Oil at the factory. Use Toyota approved Toyota Genuine Differential Gear Oil or an equivalent of matching quality to satisfy the specification. Using a differential gear oil other than specified may cause occurrences of rattling noises while idling and poor fuel consumption. Never use different brands together.
- →SAE 0W-20 is the best choice for good fuel economy and good starting in cold weather. If SAE 0W-20 is not available, SAE 5W-20 oil may be used. However, it must be replaced with SAE 0W-20 at the next oil change. The engine oil capacity is a reference quantity to be used when exchanging. Warm up the engine and turn off the hybrid system, wait more than 5 minutes, and check the oil level on the dipstick.
- →The recommended oil grade is API GL-3, however, API GL-4 can also be used. Using a manual transmission gear oil other than TOYOTA Genuine MG Gear Oil special II may cause occurrences of rattling noises while idling and poor fuel consumption.Never use different brands together.
- →In cold areas where temperatures range below the freezing point, use washer fluid containing antifreeze.
This vehicle's factory manual
The spec is above. This opens the 2017 Toyota factory books so you can go into the 86 procedure.
Related for Your 2017 Toyota 86
Frequently Asked Questions
- What are the fluid capacities for a 2017 Toyota 86?
- The 2017 Toyota 86 fluid capacities are: Automatic Transmission Fluid: 7.90 QTS. (7.47 L) — TOYOTA Genuine Automatic Transmission Fluid Type WS Note: Using transmission fluid other than TOYOTA Genuine ATF WS may cause deterioration in shift quality, locking up of your transmission acompanied by vibration, and ultimately damage the transmission of your vehicle. The fluid capacity is the quantity of reference., Brake Fluid: — SAE J1703 or FMVSS No. 116 DOT 3, Differential Gear Oil: 1.20 QTS. (1.13 L) — TOYOTA Genuine Differential Gear Oil LX. Ohter LSD gear oil that meets API GL-5 and SAE 75W-85 Note: Your Toyota vehicle is filled with Toyota Genuine Differential Gear Oil at the factory. Use Toyota approved Toyota Genuine Differential Gear Oil or an equivalent of matching quality to satisfy the specification. Using a differential gear oil other than specified may cause occurrences of rattling noises while idling and poor fuel consumption. Never use different brands together., Engine Coolant (Automatic Trans): 7.90 QTS. (7.47 L) — TOYOTA Super Long Life Coolant BLUE or similar high-quality ethylene glycol-based non-silicate, non-amine, non-nitrate and non-borate coolant with long-life hybrid organic acid technology, Engine Oil: 5.20 QTS. (4.92 L) — TOYOTA Genuine Motor Oil. SAE 0W-20 or equivalent ILSAC multigrade oil Note: SAE 0W-20 is the best choice for good fuel economy and good starting in cold weather. If SAE 0W-20 is not available, SAE 5W-20 oil may be used. However, it must be replaced with SAE 0W-20 at the next oil change. The engine oil capacity is a reference quantity to be used when exchanging. Warm up the engine and turn off the hybrid system, wait more than 5 minutes, and check the oil level on the dipstick., Manual Transmission Fluid: 2.30 QTS. (2.17 L) — TOYOYA Genuine MG Gear Oil special II. Other gear oil that meets API GL-3 and SAE 75W-90 Note: The recommended oil grade is API GL-3, however, API GL-4 can also be used. Using a manual transmission gear oil other than TOYOTA Genuine MG Gear Oil special II may cause occurrences of rattling noises while idling and poor fuel consumption.Never use different brands together., Engine Coolant (Standard Trans): 7.60 QTS. (7.19 L) — TOYOTA Super Long Life Coolant BLUE or similar high-quality ethylene glycol-based non-silicate, non-amine, non-nitrate and non-borate coolant with long-life hybrid organic acid technology.
- How much engine oil does a 2017 Toyota 86 take?
- The 2017 Toyota 86 takes 5.20 QTS. (4.92 L) — TOYOTA Genuine Motor Oil. SAE 0W-20 or equivalent ILSAC multigrade oil Note: SAE 0W-20 is the best choice for good fuel economy and good starting in cold weather. If SAE 0W-20 is not available, SAE 5W-20 oil may be used. However, it must be replaced with SAE 0W-20 at the next oil change. The engine oil capacity is a reference quantity to be used when exchanging. Warm up the engine and turn off the hybrid system, wait more than 5 minutes, and check the oil level on the dipstick..