2017 Chevrolet SuburbanOil Type & Capacity

OEM spec from the factory service manual for the LS, 4WD, Gas variant.

Quick Answer

Oil Type

$API - SAE 0W-20

Capacity (w/ Filter)

8.00 QTS.

7.57 L

Variant

LS, 4WD, Gas

Note: Engine oil meeting the dexos1 specification of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. Do not add anything to the oil. The recommended oils meeting the dexos1 specification are all that is needed for good performance and engine protection. Engine oil system flushes are not recommended and could cause engine damage not covered by the vehicle warranty.

This vehicle's factory manual

2017 Chevrolet Suburban: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.

Open this vehicle’s service manual
Sister site: See this spec on WhatTypeOfOil.com β€” our quick oil type & capacity lookup for every vehicle.

Related for Your 2017 Chevrolet Suburban

Frequently Asked Questions

What type of oil does a 2017 Chevrolet Suburban take?
The 2017 Chevrolet Suburban requires API - SAE 0W-20. The exact spec may vary slightly by engine variant β€” this page shows the OEM recommendation for the LS, 4WD, Gas configuration.
How much oil does a 2017 Chevrolet Suburban need?
The 2017 Chevrolet Suburban takes 8.00 QTS. (7.57 L) of engine oil with the filter replaced.
Can I use synthetic oil in my 2017 Chevrolet Suburban?
Yes β€” synthetic oil that meets the API - SAE 0W-20 specification is acceptable and often preferred for better protection and longer change intervals.
What happens if I use the wrong oil in my 2017 Chevrolet Suburban?
Using oil that does not meet the API - SAE 0W-20 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.