2017 Bmw X5 Xdrive40e Fluid Capacities

OEM fluid capacity chart from the factory service manual for the 2017 (2017).

Quick Answer

Air Cond Compressor Oil (Gas/Electric)

1.60 OZS. (0.04 L) β€” Sanden SP-A2

Automatic Transmission Fluid (2.0L Eng)

9.19 QTS. (8.69 L) β€” Automatic Transmission Fluid ATF+3

Brake Fluid

β€” BMW Brake Fluid DOT 4 with low viscosity

Engine Coolant (2.0L Eng)

2.85 QTS. (2.69 L) β€” Frostox HT-12 antifreeze and corrosion inhibitor

Engine Oil (2.0L Eng)

5.00 QTS. (4.73 L) β€” BMW High Performance Synthetic Engine Oil, SAE 0W-20

Notes

  • β†’See Underhood Decal for oil capacity.
  • β†’The nameplate in the engine compartment indicates which refrigerant has been used.
  • β†’Approximate capacity.
  • β†’Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts).
  • β†’Fill with water and - if required - with a washer antifreeze (according to manufacturer's recommendations). Mix the washer fluid before adding it to the reservoir.
Source: Factory service manual β€” 2017 Bmw X5 Xdrive40e 2017.

This vehicle's factory manual

The spec is above. This opens the 2017 Bmw factory books so you can go into the X5 Xdrive40e procedure.

Open the 2017 Bmw manual

Related for Your 2017 Bmw X5 Xdrive40e

Frequently Asked Questions

What are the fluid capacities for a 2017 Bmw X5 Xdrive40e?
The 2017 Bmw X5 Xdrive40e fluid capacities are: Air Cond Compressor Oil (Gas/Electric): 1.60 OZS. (0.04 L) β€” Sanden SP-A2, Automatic Transmission Fluid (2.0L Eng): 9.19 QTS. (8.69 L) β€” Automatic Transmission Fluid ATF+3, Brake Fluid: β€” BMW Brake Fluid DOT 4 with low viscosity, Engine Coolant (2.0L Eng): 2.85 QTS. (2.69 L) β€” Frostox HT-12 antifreeze and corrosion inhibitor, Engine Oil (2.0L Eng): 5.00 QTS. (4.73 L) β€” BMW High Performance Synthetic Engine Oil, SAE 0W-20.
How much engine oil does a 2017 Bmw X5 Xdrive40e take?
The 2017 Bmw X5 Xdrive40e takes 1.60 OZS. (0.04 L) β€” Sanden SP-A2.