2017 Bmw 650i-xdrive Fluid Capacities

OEM fluid capacity chart from the factory service manual for the 2017-2018 (2017-2018).

Quick Answer

Automatic Transmission Fluid

8.98 QTS. (8.49 L) β€” Automatic Transmission Fluid ATF+3

Brake Fluid

β€” BMW Brake Fluid DOT 4 with low viscosity

Differential Gear Oil

β€” Hypoid Axle Oil G3 (Fuchs Titan EG 4218) Only for Rear differential, not for hang-on clutch (HOC) Note: BMW Part No. 83 22 2 365 988.

Engine Coolant

15.21 QTS. (14.39 L) β€” Frostox HT-12 antifreeze and corrosion inhibitor

Engine Oil

10.00 QTS. (9.46 L) β€” BMW High Performance Synthetic Engine Oil, SAE 0W-30

Notes

  • β†’The nameplate in the engine compartment indicates which refrigerant has been used.
  • β†’BMW Part No. 83 22 2 365 988.
  • β†’Fill with water and - if required - with a washer antifreeze (according to manufacturer's recommendations). Mix the washer fluid before adding it to the reservoir.
Source: Factory service manual β€” 2017 Bmw 650i-xdrive 2017-2018.

This vehicle's factory manual

2017 Bmw 650i-xdrive: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.

Open this vehicle’s service manual

Related for Your 2017 Bmw 650i-xdrive

Frequently Asked Questions

What are the fluid capacities for a 2017 Bmw 650i-xdrive?
The 2017 Bmw 650i-xdrive fluid capacities are: Automatic Transmission Fluid: 8.98 QTS. (8.49 L) β€” Automatic Transmission Fluid ATF+3, Brake Fluid: β€” BMW Brake Fluid DOT 4 with low viscosity, Differential Gear Oil: β€” Hypoid Axle Oil G3 (Fuchs Titan EG 4218) Only for Rear differential, not for hang-on clutch (HOC) Note: BMW Part No. 83 22 2 365 988., Engine Coolant: 15.21 QTS. (14.39 L) β€” Frostox HT-12 antifreeze and corrosion inhibitor, Engine Oil: 10.00 QTS. (9.46 L) β€” BMW High Performance Synthetic Engine Oil, SAE 0W-30.
How much engine oil does a 2017 Bmw 650i-xdrive take?
The 2017 Bmw 650i-xdrive takes 10.00 QTS. (9.46 L) β€” BMW High Performance Synthetic Engine Oil, SAE 0W-30.