How much engine oil does a 2017 Bmw 440i-xdrive take?

The 2017 Bmw 440i-xdrive takes 6.90 QTS. (6.52 L) — BMW High Performance Synthetic Engine Oil, SAE 0W-20.

Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

2017 Bmw 440i-xdrive Fluid Capacities

OEM fluid capacity chart from the factory service manual for the 2017-2018 (2017-2018).

Quick Answer

Automatic Transmission Fluid

9.30 QTS. (8.8 L) — Automatic Transmission Fluid ATF+3

Brake Fluid

— BMW Brake Fluid DOT 4 with low viscosity

Differential Gear Oil

— Hypoid Axle Oil G3 (Fuchs Titan EG 4218) Only for Rear differential, not for hang-on clutch (HOC) Note: BMW Part No. 83 22 2 365 988.

Engine Coolant (Automatic Trans)

11.09 QTS. (10.49 L) — Frostox HT-12 antifreeze and corrosion inhibitor

Engine Coolant

4.12 QTS. (3.89 L) — Frostox HT-12 antifreeze and corrosion inhibitor

Engine Oil

6.90 QTS. (6.52 L) — BMW High Performance Synthetic Engine Oil, SAE 0W-20

Manual Transmission Fluid

1.27 QTS. (1.2 L) — Manual Gearbox Oil MTF-LT-5 Note: BMW Part No. 83 22 2 156 969.

Notes

→The nameplate in the engine compartment indicates which refrigerant has been used.
→BMW Part No. 83 22 2 365 988.
→BMW Part No. 83 22 2 156 969.
→Fill with water and - if required - with a washer antifreeze (according to manufacturer's recommendations). Mix the washer fluid before adding it to the reservoir.

Source: Factory service manual — 2017 Bmw 440i-xdrive 2017-2018.

Other specs:All specs Oil Type Coolant Trans Fluid Brake Fluid

This vehicle's factory manual

2017 Bmw 440i-xdrive: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.

Open this vehicle’s service manual

What You'll Need

Tools

Fluid Funnel Set

Search Amazon →

Tool

Large Capacity Drain Pan

Search Amazon →

Related for Your 2017 Bmw 440i-xdrive

Maintenance Specs

🛢️Oil Type & Capacity ❄️Coolant Type ⚙️Transmission Fluid 🚨Brake Fluid

Quick Actions

🏠2017 Bmw 440i-xdrive Hub 🛠️All Repair Guides 🤖AI Diagnosis

Frequently Asked Questions

What are the fluid capacities for a 2017 Bmw 440i-xdrive?: The 2017 Bmw 440i-xdrive fluid capacities are: Automatic Transmission Fluid: 9.30 QTS. (8.8 L) — Automatic Transmission Fluid ATF+3, Brake Fluid: — BMW Brake Fluid DOT 4 with low viscosity, Differential Gear Oil: — Hypoid Axle Oil G3 (Fuchs Titan EG 4218) Only for Rear differential, not for hang-on clutch (HOC) Note: BMW Part No. 83 22 2 365 988., Engine Coolant (Automatic Trans): 11.09 QTS. (10.49 L) — Frostox HT-12 antifreeze and corrosion inhibitor, Engine Coolant: 4.12 QTS. (3.89 L) — Frostox HT-12 antifreeze and corrosion inhibitor, Engine Oil: 6.90 QTS. (6.52 L) — BMW High Performance Synthetic Engine Oil, SAE 0W-20, Manual Transmission Fluid: 1.27 QTS. (1.2 L) — Manual Gearbox Oil MTF-LT-5 Note: BMW Part No. 83 22 2 156 969..
How much engine oil does a 2017 Bmw 440i-xdrive take?: The 2017 Bmw 440i-xdrive takes 6.90 QTS. (6.52 L) — BMW High Performance Synthetic Engine Oil, SAE 0W-20.