Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2017 Bmw 430i-xdrive Fluid Capacities
OEM fluid capacity chart from the factory service manual for the 2017-2018 (2017-2018).
Quick Answer
Automatic Transmission Fluid
9.30 QTS. (8.8 L) — Automatic Transmission Fluid ATF+3
Brake Fluid
— BMW Brake Fluid DOT 4 with low viscosity
Differential Gear Oil
— Hypoid Axle Oil G3 (Fuchs Titan EG 4218) Only for Rear differential, not for hang-on clutch (HOC) Note: BMW Part No. 83 22 2 365 988.
Engine Coolant
3.80 QTS. (3.59 L) — Frostox HT-12 antifreeze and corrosion inhibitor
Engine Oil
5.25 QTS. (4.96 L) — BMW High Performance Synthetic Engine Oil, SAE 0W-30 or SAE 0W-20 Note: The suitable viscosity grade is indicated on a label in the engine compartment. Alternatively, also engine oils with viscosity grades SAE 5W-20, SAE 5W-30, SAE 0W-40 or SAE 5W-40 can be used.
Notes
- →The nameplate in the engine compartment indicates which refrigerant has been used.
- →BMW Part No. 83 22 2 365 988.
- →Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts).
- →The suitable viscosity grade is indicated on a label in the engine compartment. Alternatively, also engine oils with viscosity grades SAE 5W-20, SAE 5W-30, SAE 0W-40 or SAE 5W-40 can be used.
- →Fill with water and - if required - with a washer antifreeze (according to manufacturer's recommendations). Mix the washer fluid before adding it to the reservoir.
This vehicle's factory manual
The spec is above. This opens the 2017 Bmw factory books so you can go into the 430i-xdrive procedure.
Related for Your 2017 Bmw 430i-xdrive
Frequently Asked Questions
- What are the fluid capacities for a 2017 Bmw 430i-xdrive?
- The 2017 Bmw 430i-xdrive fluid capacities are: Automatic Transmission Fluid: 9.30 QTS. (8.8 L) — Automatic Transmission Fluid ATF+3, Brake Fluid: — BMW Brake Fluid DOT 4 with low viscosity, Differential Gear Oil: — Hypoid Axle Oil G3 (Fuchs Titan EG 4218) Only for Rear differential, not for hang-on clutch (HOC) Note: BMW Part No. 83 22 2 365 988., Engine Coolant: 3.80 QTS. (3.59 L) — Frostox HT-12 antifreeze and corrosion inhibitor, Engine Oil: 5.25 QTS. (4.96 L) — BMW High Performance Synthetic Engine Oil, SAE 0W-30 or SAE 0W-20 Note: The suitable viscosity grade is indicated on a label in the engine compartment. Alternatively, also engine oils with viscosity grades SAE 5W-20, SAE 5W-30, SAE 0W-40 or SAE 5W-40 can be used..
- How much engine oil does a 2017 Bmw 430i-xdrive take?
- The 2017 Bmw 430i-xdrive takes 5.25 QTS. (4.96 L) — BMW High Performance Synthetic Engine Oil, SAE 0W-30 or SAE 0W-20 Note: The suitable viscosity grade is indicated on a label in the engine compartment. Alternatively, also engine oils with viscosity grades SAE 5W-20, SAE 5W-30, SAE 0W-40 or SAE 5W-40 can be used..