2017 Bmw 230i Xdrive 2d Convertible Fluid Capacities

OEM fluid capacity chart from the factory service manual for the 2017-2021 (2017-2021).

Quick Answer

Automatic Transmission Fluid

9.30 QTS. (8.8 L) β€” Automatic Transmission Fluid ATF+3

Brake Fluid

β€” BMW Brake Fluid DOT 4 with low viscosity

Differential Gear Oil

β€” Hypoid Axle Oil G3 (Fuchs Titan EG 4218) Only for Rear differential, not for hang-on clutch (HOC)

Engine Coolant

3.80 QTS. (3.59 L) β€” Frostox HT-12 antifreeze and corrosion inhibitor

Engine Oil

5.60 QTS. (5.29 L) β€” BMW High Performance Synthetic Engine Oil, SAE 0W-20

Notes

  • β†’The nameplate in the engine compartment indicates which refrigerant has been used.
  • β†’BMW Part No. 83 22 2 365 988.
  • β†’Fill with water and - if required - with a washer antifreeze (according to manufacturer's recommendations). Mix the washer fluid before adding it to the reservoir.
Source: Factory service manual β€” 2017 Bmw 230i Xdrive 2d Convertible 2017-2021.

This vehicle's factory manual

The spec is above. This opens the 2017 Bmw factory books so you can go into the 230i Xdrive 2d Convertible procedure.

Open the 2017 Bmw manual

Related for Your 2017 Bmw 230i Xdrive 2d Convertible

Frequently Asked Questions

What are the fluid capacities for a 2017 Bmw 230i Xdrive 2d Convertible?
The 2017 Bmw 230i Xdrive 2d Convertible fluid capacities are: Automatic Transmission Fluid: 9.30 QTS. (8.8 L) β€” Automatic Transmission Fluid ATF+3, Brake Fluid: β€” BMW Brake Fluid DOT 4 with low viscosity, Differential Gear Oil: β€” Hypoid Axle Oil G3 (Fuchs Titan EG 4218) Only for Rear differential, not for hang-on clutch (HOC), Engine Coolant: 3.80 QTS. (3.59 L) β€” Frostox HT-12 antifreeze and corrosion inhibitor, Engine Oil: 5.60 QTS. (5.29 L) β€” BMW High Performance Synthetic Engine Oil, SAE 0W-20.
How much engine oil does a 2017 Bmw 230i Xdrive 2d Convertible take?
The 2017 Bmw 230i Xdrive 2d Convertible takes 5.60 QTS. (5.29 L) β€” BMW High Performance Synthetic Engine Oil, SAE 0W-20.