Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2016 Toyota HighlanderOil Type & Capacity
OEM spec from the factory service manual for the LE, 2.7L Eng VIN A variant.
Quick Answer
Oil Type
TOYOTA Genuine Motor Oil. SAE 0W-20 or equivalent ILSAC multigrade oil
Capacity (w/ Filter)
4.60 QTS.
4.35 L
Variant
LE, 2.7L Eng VIN A
Note: SAE 0W-20 Synthetic Oil is the oil that provides the optimal level of fuel efficiency.
Source: Factory service manual — 2016 Toyota Highlander LE, 2.7L Eng VIN A. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of oil does a 2016 Toyota Highlander take?
- The 2016 Toyota Highlander requires TOYOTA Genuine Motor Oil. SAE 0W-20 or equivalent ILSAC multigrade oil. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the LE, 2.7L Eng VIN A configuration.
- How much oil does a 2016 Toyota Highlander need?
- The 2016 Toyota Highlander takes 4.60 QTS. (4.35 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2016 Toyota Highlander?
- Yes — synthetic oil that meets the TOYOTA Genuine Motor Oil. SAE 0W-20 or equivalent ILSAC multigrade oil specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2016 Toyota Highlander?
- Using oil that does not meet the TOYOTA Genuine Motor Oil. SAE 0W-20 or equivalent ILSAC multigrade oil specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.