Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2016 Scion Fr-sCoolant Type & Capacity
OEM spec from the factory service manual for the Automatic Trans variant.
Quick Answer
Coolant Type
TOYOTA Genuine 50/50 Pre-mixed Super Long Life Coolant BLUE
Capacity
7.90 QTS.
7.47 L
Variant
Automatic Trans
Note: Similar high quality ethylene glycol based non-silicate, non-amine, non-nitrate and non-borate coolant with long life hybrid organic acid technology.
This vehicle's factory manual
2016 Scion Fr-s: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Other specs:All specs
What You'll Need
Related for Your 2016 Scion Fr-s
Quick Actions
Frequently Asked Questions
- What type of coolant does a 2016 Scion Fr-s take?
- The 2016 Scion Fr-s requires TOYOTA Genuine 50/50 Pre-mixed Super Long Life Coolant BLUE. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Automatic Trans configuration.
- How much coolant does a 2016 Scion Fr-s hold?
- The 2016 Scion Fr-s cooling system capacity is 7.90 QTS. (7.47 L).
- Can I use universal coolant in my 2016 Scion Fr-s?
- It is strongly recommended to use coolant that meets the TOYOTA Genuine 50/50 Pre-mixed Super Long Life Coolant BLUE specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2016 Scion Fr-s?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.