Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2016 Hyundai AccentOil Type & Capacity
OEM spec from the factory service manual for the SE, 4D Hatchback, Automatic Trans variant.
Quick Answer
Oil Type
API - SM, ILSAC GF-4 or Above SAE 5W-20, 5W-30
Capacity (w/ Filter)
3.80 QTS.
3.59 L
Variant
SE, 4D Hatchback, Automatic Trans
Note: If API service SM engine oil is not available you may use API service SL.
For better fuel economy, it is recommended to use the engine oil viscosity grade SAE 5W-20 (API SM/ILSAC GF-4).
Hyundai recommends Quaker State.
Source: Factory service manual — 2016 Hyundai Accent SE, 4D Hatchback, Automatic Trans. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of oil does a 2016 Hyundai Accent take?
- The 2016 Hyundai Accent requires API - SM, ILSAC GF-4 or Above SAE 5W-20, 5W-30. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the SE, 4D Hatchback, Automatic Trans configuration.
- How much oil does a 2016 Hyundai Accent need?
- The 2016 Hyundai Accent takes 3.80 QTS. (3.59 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2016 Hyundai Accent?
- Yes — synthetic oil that meets the API - SM, ILSAC GF-4 or Above SAE 5W-20, 5W-30 specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2016 Hyundai Accent?
- Using oil that does not meet the API - SM, ILSAC GF-4 or Above SAE 5W-20, 5W-30 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.