2016 Ford Fusion Fluid Capacities

OEM fluid capacity chart from the factory service manual for the 2016 (2016).

Quick Answer

Air Cond Compressor Oil (Gas/Electric)

4.90 OZS. (0.14 L) β€” YN-32

Automatic Transmission Fluid

9.00 QTS. (8.51 L) β€” MOTORCRAFT Automatic Transmission Fluid MERCON LV Note: Approximate dry fill capacity. Actual amount may vary during fluid changes. Automatic Transmission that require MERCON LV should only use MERCON LV ATF.

Brake Fluid

β€” MOTORCRAFT DOT 4 Low Viscosity (LV) High Performance Brake Fluid, or equivalent. Note: Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A2.

Engine Coolant (2.0L Eng,Gas/Electric)

1.10 QTS. (1.04 L) β€” MOTORCRAFT Orange Antifreeze/Coolant Prediluted Note: Add the coolant type originally equipped in the vehicle. Indicates only approximate dry fill capacity. Some applications may vary.

Engine Coolant (Energi SE Luxury,Energi Titanium,2.0L Eng,Gas/Electric)

8.80 QTS. (8.32 L) β€” MOTORCRAFT Orange Antifreeze/Coolant Prediluted Note: Add the coolant type originally equipped in the vehicle. Indicates only approximate dry fill capacity. Some applications may vary.

Engine Oil (2.0L Eng,Gas/Electric)

4.50 QTS. (4.25 L) β€” MOTORCRAFT SAE 0W-20 Synthetic Blend Motor Oil Note: API - SAE 5W-20 Full Synthetic Motor Oil may be used if SAE 0W-20 Synthetic Blend Motor Oil is not available.

Transfer Case Fluid

0.37 QTS. (0.35 L) β€” MOTORCRAFT SAE 75W-140 Synthetic Rear Axle Lubricant

Engine Coolant (S Hybrid,SE Hybrid,Titanium Hybrid,2.0L Eng,Gas/Electric)

7.40 QTS. (7 L) β€” MOTORCRAFT Orange Antifreeze/Coolant Prediluted Note: Add the coolant type originally equipped in the vehicle. Indicates only approximate dry fill capacity. Some applications may vary.

Air Cond Compressor Oil (Gas)

4.90 OZS. (0.14 L) β€” PAG 46

Engine Coolant (2.5L Eng)

7.20 QTS. (6.81 L) β€” MOTORCRAFT Orange Antifreeze/Coolant Prediluted Note: Add the coolant type originally equipped in the vehicle. Indicates only approximate dry fill capacity. Some applications may vary.

Engine Oil (2.5L Eng)

5.70 QTS. (5.39 L) β€” MOTORCRAFT SAE 5W-20 Full Synthetic Motor Oil or SAE 5W-20 Premium Synthetic Blend Motor Oil Note: Use of synthetic or synthetic blend motor oil is not mandatory. Only use fluid that meets Ford specification. Motor oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines are also acceptable. Do not use oil labeled with API SN service category unless the label also displays the API Certification Mark. Do not use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage that is not covered by your Ford warranty.

Engine Coolant (1.5L Eng)

11.10 QTS. (10.5 L) β€” MOTORCRAFT Orange Antifreeze/Coolant Prediluted Note: Add the coolant type originally equipped in the vehicle. Indicates only approximate dry fill capacity. Some applications may vary.

Engine Oil (1.5L Eng)

4.30 QTS. (4.06 L) β€” MOTORCRAFT SAE 5W-20 Full Synthetic Motor Oil or SAE 5W-20 Premium Synthetic Blend Motor Oil

Differential Gear Oil (AWD)

0.60 QTS. (0.56 L) β€” MOTORCRAFT SAE 80W-90 Premium Rear Axle Lubricant

Engine Coolant (2.0L Eng,Gas)

8.90 QTS. (8.42 L) β€” MOTORCRAFT Orange Antifreeze/Coolant Prediluted Note: Add the coolant type originally equipped in the vehicle. Indicates only approximate dry fill capacity. Some applications may vary.

Engine Oil (2.0L Eng,Gas)

5.70 QTS. (5.39 L) β€” MOTORCRAFT SAE 5W-30 Full Synthetic Motor Oil or SAE 5W-30 Premium Synthetic Blend Motor Oil Note: Use of synthetic or synthetic blend motor oil is not mandatory. Only use fluid that meets Ford specification. Motor oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines are also acceptable. Do not use oil labeled with API SN service category unless the label also displays the API Certification Mark. Do not use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage that is not covered by your Ford warranty.

Notes

  • β†’The air conditioning refrigerant system contains refrigerant R-134a under high pressure. Opening the air conditioning refrigerant system can cause personal injury.
  • β†’Approximate dry fill capacity. Actual amount may vary during fluid changes. Automatic Transmission that require MERCON LV should only use MERCON LV ATF.
  • β†’Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A2.
  • β†’Add the coolant type originally equipped in the vehicle. Indicates only approximate dry fill capacity. Some applications may vary.
  • β†’API - SAE 5W-20 Full Synthetic Motor Oil may be used if SAE 0W-20 Synthetic Blend Motor Oil is not available.
  • β†’Follow the Manufacturer's Instructions for the mixture ratio.
  • β†’Use of synthetic or synthetic blend motor oil is not mandatory. Only use fluid that meets Ford specification. Motor oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines are also acceptable. Do not use oil labeled with API SN service category unless the label also displays the API Certification Mark. Do not use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage that is not covered by your Ford warranty.
Source: Factory service manual β€” 2016 Ford Fusion 2016.

This vehicle's factory manual

2016 Ford Fusion: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.

Open this vehicle’s service manual

Related for Your 2016 Ford Fusion

Frequently Asked Questions

What are the fluid capacities for a 2016 Ford Fusion?
The 2016 Ford Fusion fluid capacities are: Air Cond Compressor Oil (Gas/Electric): 4.90 OZS. (0.14 L) β€” YN-32, Automatic Transmission Fluid: 9.00 QTS. (8.51 L) β€” MOTORCRAFT Automatic Transmission Fluid MERCON LV Note: Approximate dry fill capacity. Actual amount may vary during fluid changes. Automatic Transmission that require MERCON LV should only use MERCON LV ATF., Brake Fluid: β€” MOTORCRAFT DOT 4 Low Viscosity (LV) High Performance Brake Fluid, or equivalent. Note: Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A2., Engine Coolant (2.0L Eng,Gas/Electric): 1.10 QTS. (1.04 L) β€” MOTORCRAFT Orange Antifreeze/Coolant Prediluted Note: Add the coolant type originally equipped in the vehicle. Indicates only approximate dry fill capacity. Some applications may vary., Engine Coolant (Energi SE Luxury,Energi Titanium,2.0L Eng,Gas/Electric): 8.80 QTS. (8.32 L) β€” MOTORCRAFT Orange Antifreeze/Coolant Prediluted Note: Add the coolant type originally equipped in the vehicle. Indicates only approximate dry fill capacity. Some applications may vary., Engine Oil (2.0L Eng,Gas/Electric): 4.50 QTS. (4.25 L) β€” MOTORCRAFT SAE 0W-20 Synthetic Blend Motor Oil Note: API - SAE 5W-20 Full Synthetic Motor Oil may be used if SAE 0W-20 Synthetic Blend Motor Oil is not available., Transfer Case Fluid: 0.37 QTS. (0.35 L) β€” MOTORCRAFT SAE 75W-140 Synthetic Rear Axle Lubricant, Engine Coolant (S Hybrid,SE Hybrid,Titanium Hybrid,2.0L Eng,Gas/Electric): 7.40 QTS. (7 L) β€” MOTORCRAFT Orange Antifreeze/Coolant Prediluted Note: Add the coolant type originally equipped in the vehicle. Indicates only approximate dry fill capacity. Some applications may vary., Air Cond Compressor Oil (Gas): 4.90 OZS. (0.14 L) β€” PAG 46, Engine Coolant (2.5L Eng): 7.20 QTS. (6.81 L) β€” MOTORCRAFT Orange Antifreeze/Coolant Prediluted Note: Add the coolant type originally equipped in the vehicle. Indicates only approximate dry fill capacity. Some applications may vary., Engine Oil (2.5L Eng): 5.70 QTS. (5.39 L) β€” MOTORCRAFT SAE 5W-20 Full Synthetic Motor Oil or SAE 5W-20 Premium Synthetic Blend Motor Oil Note: Use of synthetic or synthetic blend motor oil is not mandatory. Only use fluid that meets Ford specification. Motor oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines are also acceptable. Do not use oil labeled with API SN service category unless the label also displays the API Certification Mark. Do not use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage that is not covered by your Ford warranty., Engine Coolant (1.5L Eng): 11.10 QTS. (10.5 L) β€” MOTORCRAFT Orange Antifreeze/Coolant Prediluted Note: Add the coolant type originally equipped in the vehicle. Indicates only approximate dry fill capacity. Some applications may vary., Engine Oil (1.5L Eng): 4.30 QTS. (4.06 L) β€” MOTORCRAFT SAE 5W-20 Full Synthetic Motor Oil or SAE 5W-20 Premium Synthetic Blend Motor Oil, Differential Gear Oil (AWD): 0.60 QTS. (0.56 L) β€” MOTORCRAFT SAE 80W-90 Premium Rear Axle Lubricant, Engine Coolant (2.0L Eng,Gas): 8.90 QTS. (8.42 L) β€” MOTORCRAFT Orange Antifreeze/Coolant Prediluted Note: Add the coolant type originally equipped in the vehicle. Indicates only approximate dry fill capacity. Some applications may vary., Engine Oil (2.0L Eng,Gas): 5.70 QTS. (5.39 L) β€” MOTORCRAFT SAE 5W-30 Full Synthetic Motor Oil or SAE 5W-30 Premium Synthetic Blend Motor Oil Note: Use of synthetic or synthetic blend motor oil is not mandatory. Only use fluid that meets Ford specification. Motor oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines are also acceptable. Do not use oil labeled with API SN service category unless the label also displays the API Certification Mark. Do not use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage that is not covered by your Ford warranty..
How much engine oil does a 2016 Ford Fusion take?
The 2016 Ford Fusion takes 4.90 OZS. (0.14 L) β€” YN-32.