Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2016 Ford Fusion S Hybrid Fluid Capacities
OEM fluid capacity chart from the factory service manual for the 2016 (2016).
Quick Answer
Air Cond Compressor Oil (Gas/Electric)
4.90 OZS. (0.14 L) — YN-32
Automatic Transmission Fluid
9.00 QTS. (8.51 L) — MOTORCRAFT Automatic Transmission Fluid MERCON LV
Brake Fluid
— MOTORCRAFT DOT 4 Low Viscosity (LV) High Performance Brake Fluid, or equivalent.
Engine Coolant (2.0L Eng,Gas/Electric)
1.10 QTS. (1.04 L) — MOTORCRAFT Orange Antifreeze/Coolant Prediluted
Engine Coolant (S Hybrid,SE Hybrid,Titanium Hybrid,2.0L Eng,Gas/Electric)
7.40 QTS. (7 L) — MOTORCRAFT Orange Antifreeze/Coolant Prediluted
Engine Oil (2.0L Eng,Gas/Electric)
4.50 QTS. (4.25 L) — MOTORCRAFT SAE 0W-20 Synthetic Blend Motor Oil
Transfer Case Fluid
0.37 QTS. (0.35 L) — MOTORCRAFT SAE 75W-140 Synthetic Rear Axle Lubricant
Notes
- →The air conditioning refrigerant system contains refrigerant R-134a under high pressure. Opening the air conditioning refrigerant system can cause personal injury.
- →Approximate dry fill capacity. Actual amount may vary during fluid changes. Automatic Transmission that require MERCON LV should only use MERCON LV ATF.
- →Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A2.
- →Add the coolant type originally equipped in the vehicle. Indicates only approximate dry fill capacity. Some applications may vary.
- →API - SAE 5W-20 Full Synthetic Motor Oil may be used if SAE 0W-20 Synthetic Blend Motor Oil is not available.
- →Follow the Manufacturer's Instructions for the mixture ratio.
This vehicle's factory manual
2016 Ford Fusion S Hybrid: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Related for Your 2016 Ford Fusion S Hybrid
Frequently Asked Questions
- What are the fluid capacities for a 2016 Ford Fusion S Hybrid?
- The 2016 Ford Fusion S Hybrid fluid capacities are: Air Cond Compressor Oil (Gas/Electric): 4.90 OZS. (0.14 L) — YN-32, Automatic Transmission Fluid: 9.00 QTS. (8.51 L) — MOTORCRAFT Automatic Transmission Fluid MERCON LV, Brake Fluid: — MOTORCRAFT DOT 4 Low Viscosity (LV) High Performance Brake Fluid, or equivalent., Engine Coolant (2.0L Eng,Gas/Electric): 1.10 QTS. (1.04 L) — MOTORCRAFT Orange Antifreeze/Coolant Prediluted, Engine Coolant (S Hybrid,SE Hybrid,Titanium Hybrid,2.0L Eng,Gas/Electric): 7.40 QTS. (7 L) — MOTORCRAFT Orange Antifreeze/Coolant Prediluted, Engine Oil (2.0L Eng,Gas/Electric): 4.50 QTS. (4.25 L) — MOTORCRAFT SAE 0W-20 Synthetic Blend Motor Oil, Transfer Case Fluid: 0.37 QTS. (0.35 L) — MOTORCRAFT SAE 75W-140 Synthetic Rear Axle Lubricant.
- How much engine oil does a 2016 Ford Fusion S Hybrid take?
- Engine oil capacity depends on the engine and whether the filter is changed. Check the applicable manual for your exact vehicle and service procedure before filling.