Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2016 Ford EdgeOil Type & Capacity
OEM spec from the factory service manual for the SEL, 2.0L Eng VIN 9, AWD variant.
Quick Answer
Oil Type
$MOTORCRAFT SAE 5W-30 Premium Synthetic Blend Motor Oil.
Capacity (w/ Filter)
5.70 QTS.
5.39 L
Variant
SEL, 2.0L Eng VIN 9, AWD
Note: FORD recommends Motorcraft Motor Oil. If Motorcraft Motor Oil is not available, use Motor Oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines. Do not use oil labeled with API SN service category unless the label also displays the API certification mark.
This vehicle's factory manual
2016 Ford Edge: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
What You'll Need
Related for Your 2016 Ford Edge
Frequently Asked Questions
- What type of oil does a 2016 Ford Edge take?
- The 2016 Ford Edge requires MOTORCRAFT SAE 5W-30 Premium Synthetic Blend Motor Oil.. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the SEL, 2.0L Eng VIN 9, AWD configuration.
- How much oil does a 2016 Ford Edge need?
- The 2016 Ford Edge takes 5.70 QTS. (5.39 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2016 Ford Edge?
- Yes — synthetic oil that meets the MOTORCRAFT SAE 5W-30 Premium Synthetic Blend Motor Oil. specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2016 Ford Edge?
- Using oil that does not meet the MOTORCRAFT SAE 5W-30 Premium Synthetic Blend Motor Oil. specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.