Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2016 Chevrolet SparkOil Type & Capacity
OEM spec from the factory service manual for the LS, Automatic CVT Trans variant.
Quick Answer
Oil Type
$API - SAE 5W-20. SAE 0W-20 may be used as an alternative
Capacity (w/ Filter)
4.20 QTS.
3.97 L
Variant
LS, Automatic CVT Trans
Note: Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended.
This vehicle's factory manual
2016 Chevrolet Spark: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
What You'll Need
Related for Your 2016 Chevrolet Spark
Frequently Asked Questions
- What type of oil does a 2016 Chevrolet Spark take?
- The 2016 Chevrolet Spark requires API - SAE 5W-20. SAE 0W-20 may be used as an alternative. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the LS, Automatic CVT Trans configuration.
- How much oil does a 2016 Chevrolet Spark need?
- The 2016 Chevrolet Spark takes 4.20 QTS. (3.97 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2016 Chevrolet Spark?
- Yes — synthetic oil that meets the API - SAE 5W-20. SAE 0W-20 may be used as an alternative specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2016 Chevrolet Spark?
- Using oil that does not meet the API - SAE 5W-20. SAE 0W-20 may be used as an alternative specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.