Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2016 Cadillac EscaladeOil Type & Capacity
OEM spec from the factory service manual for the Base, 4WD, Trans Mfr CD 6L80-E/MYC variant.
Quick Answer
Oil Type
$API - SAE 0W-20
Capacity (w/ Filter)
8.00 QTS.
7.57 L
Variant
Base, 4WD, Trans Mfr CD 6L80-E/MYC
Note: The engine requires engine oil approved to the dexos specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 0W-20 GM P/N 19259487 (Canadian P/N 19289784) is the best viscosity grade for the 5.3L and 6.2L V8 engines.
Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
NOTE: The engine oil capacity has been updated from 8.50 qts to 8.0 qts in reference to GM's Document ID: 3998244, #PIP5231A.
This vehicle's factory manual
2016 Cadillac Escalade: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
Other specs:All specs
What You'll Need
Related for Your 2016 Cadillac Escalade
Frequently Asked Questions
- What type of oil does a 2016 Cadillac Escalade take?
- The 2016 Cadillac Escalade requires API - SAE 0W-20. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Base, 4WD, Trans Mfr CD 6L80-E/MYC configuration.
- How much oil does a 2016 Cadillac Escalade need?
- The 2016 Cadillac Escalade takes 8.00 QTS. (7.57 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2016 Cadillac Escalade?
- Yes — synthetic oil that meets the API - SAE 0W-20 specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2016 Cadillac Escalade?
- Using oil that does not meet the API - SAE 0W-20 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.