❄️Coolant Type

BMW Z4 sDrive35i Coolant Type

Factory coolant type for the BMW Z4 sDrive35i.

Last updated: 2026-10-31 • Reading time: 8 min • By AllOEMManuals Editorial Team

Quick Answer

2015-2016 BMW Z4 sDrive35i: 8.98 QTS. (8.49 L) — Frostox HT-12 antifreeze and corrosion inhibitor.

GenerationYearsTop spec
2015-20162015-20168.98 QTS. (8.49 L) — Frostox HT-12 antifreeze and corrosion inhibitor

This vehicle's factory manual

BMW Z4 sDrive35i: choose your year, then confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.

Open this vehicle’s service manual

BMW Z4 sDrive35i maintenance schedule

Factory Manual ConfirmationCoolant Type

Know the exact coolant type job for your BMW Z4 sDrive35i

2015-2016 BMW Z4 sDrive35i: 8.98 QTS. (8.49 L) — Frostox HT-12 antifreeze and corrosion inhibitor.

Fluid type and capacity can change by engine, drivetrain, and transmission. Verify the exact branch before filling anything. Once the spec is confirmed, use the supplies and purchase links below to build the full one-trip shopping list before you start the repair.

Exact Vehicle Check

The button opens the factory book for this vehicle. Use the engine picker only when your trim is not the one this page already matched.

Open the factory manual above to confirm the exact engine before ordering parts.

2015-2016

Engine Coolant (Automatic DCT Trans)8.98 QTS. (8.49 L) — Frostox HT-12 antifreeze and corrosion inhibitor
Notes
  • →Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts).

Parts and supplies

These links search for related products. Check your year, engine, specification, and fitment with the seller before ordering.

Search for parts
Check fitment

BMW Z4 sDrive35i coolant

Confirm the specification and fitment for your exact vehicle before ordering.

We earn a small commission if you buy through these links — at zero extra cost to you. These are search results, not verified vehicle-specific recommendations.

Coolant Service — Manual's Parts List

Flush or top-off — here is exactly what you need.

Vehicle-Scoped Amazon Search

Opens Amazon with BMW Z4 sDrive35i prefilled so you can confirm fitment and avoid wrong parts.

Check Fitment on Amazon

Get everything at once

Search results vary; confirm each item and its fitment before buying.

See All on Amazon

Links go to Amazon via our affiliate store (aiautorepair-20). We earn a small commission at no extra cost to you — it keeps the site running and the data free.

One-Trip Shopping List

Recommended supplies and tools for this job, grouped so you can buy everything before the repair starts.

Frequently Asked Questions

What coolant type does a BMW Z4 sDrive35i use?
2015-2016 BMW Z4 sDrive35i: 8.98 QTS. (8.49 L) — Frostox HT-12 antifreeze and corrosion inhibitor.
Can I use universal coolant in a BMW Z4 sDrive35i?
Factory manuals specify exact coolant chemistry for the BMW Z4 sDrive35i. Using the wrong coolant type can cause corrosion, overheating, or gasket damage. Always match the OEM specification exactly — do not mix incompatible coolant types.

Get the Complete Maintenance Schedule for BMW Z4 sDrive35i

Oil, filters, belts, brakes, and fluid intervals sent to your inbox. Unsubscribe anytime.

Not sure you want to DIY? Compare local shop pricing first.

Author & Review

Published by AllOEMManuals, founded by Lyndon Bedford, an automotive technician with 20 years of experience. He owned and operated a mechanic shop in Hurst, Texas from 2014 to 2022 and continues hands-on repair work.

Content may combine manual references, general repair templates, and AI-assisted drafting. Confirm the source, vehicle configuration, and applicability before working. Report corrections through our contact page.

Last updated: 2026-10-31

Need a full step-by-step repair guide?

Start Free AI Diagnosis →

100% Free — No signup required