Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2016 Bmw X5 Xdrive40e Fluid Capacities
OEM fluid capacity chart from the factory service manual for the 2016 (2016).
Quick Answer
Air Cond Compressor Oil (Gas/Electric)
1.60 OZS. (0.04 L) — Sanden SP-A2
Automatic Transmission Fluid (2.0L Eng)
9.19 QTS. (8.69 L) — Automatic Transmission Fluid ATF+3
Brake Fluid
— BMW Brake Fluid DOT 4 with low viscosity
Engine Coolant (2.0L Eng)
2.85 QTS. (2.69 L) — Frostox HT-12 antifreeze and corrosion inhibitor
Engine Oil (Gas/Electric)
5.02 QTS. (4.75 L) — BMW Gasoline Engines. Oil viscosity of 0W-20, LL-14 FE+
Notes
- →See Underhood Decal for oil capacity.
- →The nameplate in the engine compartment indicates which refrigerant has been used.
- →Approximate capacity.
- →Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts).
- →As of 7/2015 production, gasoline and diesel engine equipped vehicles have a new engine oil viscosity label (located on underside of engine compartment lid). These engines require a zero weight viscosity engine oil. Approximate capacity.
- →Fill with water and - if required - with a washer antifreeze (according to manufacturer's recommendations). Mix the washer fluid before adding it to the reservoir.
This vehicle's factory manual
2016 Bmw X5 Xdrive40e: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Related for Your 2016 Bmw X5 Xdrive40e
Frequently Asked Questions
- What are the fluid capacities for a 2016 Bmw X5 Xdrive40e?
- The 2016 Bmw X5 Xdrive40e fluid capacities are: Air Cond Compressor Oil (Gas/Electric): 1.60 OZS. (0.04 L) — Sanden SP-A2, Automatic Transmission Fluid (2.0L Eng): 9.19 QTS. (8.69 L) — Automatic Transmission Fluid ATF+3, Brake Fluid: — BMW Brake Fluid DOT 4 with low viscosity, Engine Coolant (2.0L Eng): 2.85 QTS. (2.69 L) — Frostox HT-12 antifreeze and corrosion inhibitor, Engine Oil (Gas/Electric): 5.02 QTS. (4.75 L) — BMW Gasoline Engines. Oil viscosity of 0W-20, LL-14 FE+.
- How much engine oil does a 2016 Bmw X5 Xdrive40e take?
- The 2016 Bmw X5 Xdrive40e takes 1.60 OZS. (0.04 L) — Sanden SP-A2.